Skip to main content
Log in
Siemens 3VA9113-0JG10 — Circuit Breaker Accessories

Siemens 3VA9113-0JG10 SENTRON Wire Connector TA1.0, 1.5–10 m

MPN3VA9113-0JG10
Active

Siemens SENTRON wire connector TA1.0, 3VA9113-0JG10, 1.5–10 mm² with control wire voltage tap-off, 3 units, accessories for 3VA1 100/160.

Siemens 3VA9113-0JG10 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3VA9113-0JG10 — Identification
ParameterValue
Product designationaccessories
AccessoriesWire connector

Product details

The Siemens 3VA9113-0JG10 is a SENTRON wire connector designated TA1.0, sold as a set of three units. It is an accessory for the 3VA1 100/160 molded-case circuit breaker family, providing a terminal point for power conductors plus a control-wire voltage tap-off.

Wire range and termination specs

The connector accepts solid copper from 14 AWG minimum up to 10 AWG maximum, and stranded copper from 14 AWG minimum up to 8 AWG maximum. For aluminum conductors, the solid range is 12 AWG minimum to 8 AWG maximum; stranded aluminum runs 12 AWG minimum to 8 AWG maximum. Finely stranded copper also spans 14 AWG minimum to 8 AWG maximum.

Frequently asked questions

What wire sizes does 3VA9113-0JG10 accept?

Solid copper: 14–10 AWG. Stranded copper: 14–8 AWG. Finely stranded copper: 14–8 AWG. Solid aluminum: 12–8 AWG. Stranded aluminum: 12–8 AWG.

What is the torque spec for this connector?

For solid conductors: 2.3 Nm on 1.5–2.5 mm², 4 Nm on 4 mm², 6.2 Nm on 6 mm². For stranded/finely stranded AWG: 20 lb-in on 14 AWG, 35 lb-in on 12 AWG, 55 lb-in on 10 AWG.

Where can I buy 3VA9113-0JG10 and get current pricing?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

MPN
3VA9113-0JG10