BOM / RFQ

Siemens 3VA9113-0JG11 — Circuit Breaker Accessories

Siemens SENTRON 3VA9113-0JG11 Wire Connector, TA1.1, 3/0 AWG

MPN3VA9113-0JG11

Active

Siemens SENTRON accessories, wire connector TA1.1, circular conductor terminal with voltage tap-off, 3 units, for 3VA1 100/160, 8 AWG–3/0 AWG copper stranded, 10–16 mm² aluminum solid, torque 55–100 lb-in, stripped length 0.48 in.

Add to RFQ

Siemens 3VA9113-0JG11 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3VA9113-0JG11 — Identification
Parameter	Value
Product designation	accessories
Accessories	Wire connector

Product details

The Siemens SENTRON 3VA9113-0JG11 is a circular-conductor terminal with an integrated control-wire voltage tap (designation TA1.1), sold as a pack of three units. It is an accessory designed for the 3VA1 100/160 molded-case circuit breaker frame, providing a tapped-off control voltage point without additional terminal blocks. Each terminal accepts copper stranded conductors from 8 AWG up to 3/0 AWG, and aluminum stranded from 12 AWG up to 3/0 AWG. For aluminum solid wire, the range is 10 mm² minimum to 16 mm² maximum. The stripped length is 0.48 in.

Integration Note for Panel Builders

The terminal includes a control-wire tap for deriving a control signal from the breaker's line side.

Frequently asked questions

What conductor sizes and types does the 3VA9113-0JG11 accept?

It accepts copper stranded 8 AWG to 3/0 AWG, aluminum stranded 12 AWG to 3/0 AWG, and aluminum solid 10 mm² to 16 mm², with a stripped length of 0.48 in.

What torque values apply to the 3VA9113-0JG11 terminals?

For 8 AWG conductors the torque is 55 lb-in; for 6 AWG through 3/0 AWG it is 100 lb-in, applicable to solid, stranded, and finely stranded conductors.