Siemens SENTRON, accessories, Box terminal TS1.2, 4 units, 10 AWG…3/0 AWG with control wire volt. tap-off, for 3VA6 150/250.
| Parameter | Value |
|---|---|
| Product designation | accessories |
| Accessories | Box terminal |
| Parameter | Value |
|---|---|
| Solid | 6 - 16 mm²: 6 Nm |
| Stranded | 10 - 4 AWG: 105 lb-in 3 - 3/0 AWG: 140 lb-in |
| Finely stranded | 10 - 4 AWG: 105 lb-in 3 - 3/0 AWG: 140 lb-in |
| Stripped length | 0.75 in |
| Designation (Of the terminal) | TS1.2 |
| For copper cable (Solid, maximum) | 10 AWG |
| For copper cable (Solid, minimum) | 10 AWG |
| For copper cable (Stranded, maximum) | 3/0 AWG |
| For copper cable (Stranded, minimum) | 10 AWG |
| For copper cable (Finely stranded, maximum) | 3/0 AWG |
| For copper cable (Finely stranded, minimum) | 10 AWG |
The Siemens SENTRON 3VA9144-0JH12 is a box terminal designated TS1.2, supplied as a pack of four units. It's an accessory for the 3VA6 150/250 molded-case circuit breaker family, adding a control-wire voltage tap-off point at the load-side lugs. That means you can pick up a control voltage directly at the breaker terminals without a separate tap block — saves a DIN-rail slot and a wiring step in the panel.
Listed as current/active on the lifecycle status. No phase-out or last-time-buy notice.
Solid copper: 6 to 16 mm² at 6 Nm. Stranded and finely stranded: 10 AWG minimum to 3/0 AWG maximum, torqued to 105 lb-in (10–4 AWG) or 140 lb-in (3–3/0 AWG). Strip length is 0.75 in.
No related articles