Siemens SENTRON TA1.2 wire connector, 3VA9253-0JG12, circular conductor terminal with control wire voltage tap-off, 2 AWG–350 kcmil copper or aluminum, 200 lb-in torque, 0.8 in strip length, 3 units.
| Parameter | Value |
|---|---|
| Product designation | accessories |
| Accessories | Wire connector |
| Parameter | Value |
|---|---|
| Solid | 2 AWG - 350 kcmil: 200 lb-in |
| Stranded | 2 AWG - 350 kcmil: 200 lb-in |
| Finely stranded | 2 AWG - 350 kcmil: 200 lb-in |
| Stripped length | 0.8 in |
| Design of the product | circular conductor terminal voltage tap 3 units |
| Designation (Of the terminal) | TA1.2 |
| For copper cable (Stranded, maximum) | 350 kcmil |
| For copper cable (Stranded, minimum) | 2 AWG |
| For aluminum cable (Stranded, maximum) | 350 |
| For aluminum cable (Stranded, minimum) | 2 |
| For copper cable (Finely stranded, maximum) | 350 kcmil |
| For copper cable (Finely stranded, minimum) | 2 AWG |
| Type of electrical connection (With control wire tap) | Yes |
The 3VA9253-0JG12: This terminal is a dedicated accessory for the SENTRON 3VA1 250 molded-case circuit breaker frame. It mounts directly onto the breaker's line or load side to create a voltage tap-off point for control wiring — useful when you need a 120 V or 24 V control circuit pickoff without a separate control power transformer tap. The three-unit pack covers a three-pole breaker.
It accepts solid, stranded, and finely stranded copper from 2 AWG to 350 kcmil, and aluminum stranded from 2 AWG to 350 kcmil. All use the same 200 lb-in torque and 0.8 in strip length.
This part is sourced to order through independent distribution. Submit an RFQ for current availability and pricing — confirmed at quote time, not listed publicly.
Yes, the TA1.2 is specifically designed with a control wire voltage tap-off, allowing you to derive a control circuit feed directly from the breaker terminal.
No related articles