Siemens SENTRON TA1.5 wire connector, 3VA9384-0JG13, 1 AWG–600 kcmil stranded, 375 lb-in torque, stripped length 1.1 in, for 3VA1/3VA2 breakers.
| Parameter | Value |
|---|---|
| Product designation | accessories |
| Accessories | Wire connector |
| Parameter | Value |
|---|---|
| Stranded | 1 AWG - 600 kcmil: 375 lb-in |
| Finely stranded | 1 AWG - 600 kcmil: 375 lb-in |
| Stripped length | 1.1 in |
| Designation (Of the terminal) | TA1.5 |
| For copper cable (Stranded, maximum) | 600 kcmil |
| For copper cable (Stranded, minimum) | 1 AWG |
| For aluminum cable (Stranded, maximum) | 600 kcmil |
| For aluminum cable (Stranded, minimum) | 1 AWG |
| For copper cable (Finely stranded, maximum) | 600 kcmil |
| For copper cable (Finely stranded, minimum) | 1 AWG |
The 3VA9384-0JG13: A control wire voltage tap-off is integrated into the connector body, allowing a smaller-gauge sense wire to be landed without a separate terminal block. The stripped length required for the main conductor is 1.1 in.
Sourced to order against BOM quantities through independent distribution.
It accepts stranded copper or aluminum cable from 1 AWG up to 600 kcmil, and finely stranded copper in the same range. The torque spec is 375 lb-in for all listed conductor types.
The integrated voltage tap-off lets you land a smaller control or sense wire directly on the connector body, eliminating a separate terminal block for that connection. This is useful for breaker trip-unit power or remote indication wiring.
Alternative models and sibling configurations in the same Siemens series. For obsolete or discontinued parts, these models can serve as compatible replacements or functional alternatives for plant maintenance.
No related articles