Siemens SENTRON TC2.4 circular conductor terminal, 3VA9473-0JL23, 2 x 2/0…600 kcmil Cu, 375 lb-in torque, with control wire voltage tap-off, 3 units.
| Parameter | Value |
|---|---|
| Product designation | accessories |
| Accessories | Wire connector |
| Parameter | Value |
|---|---|
| Stranded | 2/0 - 600 kcmil: 375 lb-in |
| Finely stranded | 2/0 - 600 kcmil: 375 lb-in |
| Stripped length | 1.2 / 2.3 in |
| Design of the product | circular conductor terminal |
| Designation (Of the terminal) | TC2.4 |
| For copper cable (Stranded, maximum) | 600 kcmil |
| For copper cable (Stranded, minimum) | 2/0 AWG |
| For copper cable (Finely stranded, maximum) | 600 kcmil |
| For copper cable (Finely stranded, minimum) | 2/0 AWG |
| Type of electrical connection (With control wire tap) | Yes |
The 3VA9473-0JL23: The TC2.4 mounts directly onto the breaker's line or load side studs — no DIN rail, no sub-panel. The control wire tap is a spring-cage or screw terminal that accepts a smaller gauge sense wire, so you can route a voltage signal to a meter or PLC input without disturbing the main power connection. Order three units per breaker for a three-pole 3VA5/6.
It accepts stranded and finely stranded copper cable from 2/0 AWG minimum to 600 kcmil maximum. Termination torque is 375 lb-in, and the stripped length is 1.2 / 2.3 in.
This terminal is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.
Yes, the terminal has a control wire voltage tap-off, allowing a smaller-gauge sense or control wire to be connected without a separate splice.
No related articles