The SENTRON 3VA9603-0JC43 is a TA4.3 circular conductor terminal — a wire connector designed to terminate four cables, each in the 120–240 mm² range, with an integrated control wire voltage tap-off. It ships as a pack of three units and is listed as an accessory for the 3VA15/25 1000 series molded-case circuit breakers.
SENTRON 3VA9603-0JC43 Wire Connector TA4.3, 4 x 120–240 mm²
SENTRON 3VA9603-0JC43 TA4.3 circular conductor terminal, wire connector for 4 x 120–240 mm² cables with control wire voltage tap-off, 3 units, accessories for 3VA15/25 1000.
Specifications
| Parameter | Value |
|---|---|
| Product designation | accessories |
| Accessories | Wire connector |
| Parameter | Value |
|---|---|
| Stranded | 4/0 - 500 kcmil: 325 lb-in |
| Finely stranded | 4/0 - 500 kcmil: 325 lb-in |
| Stripped length | 0.91 1.75 |
| Design of the product | circular conductor terminal |
| Designation (Of the terminal) | TA4.3 |
| For copper cable (Stranded, maximum) | 500 |
| For copper cable (Stranded, minimum) | 4/0 |
| For aluminum cable (Stranded, maximum) | 500 |
| For aluminum cable (Stranded, minimum) | 4/0 |
| For copper cable (Finely stranded, maximum) | 500 |
| For copper cable (Finely stranded, minimum) | 4/0 |
| Type of electrical connection (With control wire tap) | Yes |
Product details
Frequently asked questions
What wire sizes does 3VA9603-0JC43 accept?
It accepts stranded copper or aluminum cable from 4/0 AWG minimum to 500 kcmil maximum, with a termination torque of 325 lb-in. Finely stranded conductors in the same range use the same torque value.
What is the stripped length for this connector?
The stripped length range is 0.91 to 1.75 inches. Set your wire stripper within that band to ensure full conductor insertion under the lug.
What does the control wire tap do on 3VA9603-0JC43?
The control wire tap provides a voltage take-off point for feeding a shunt trip, undervoltage release, or auxiliary device without a separate splice block. It is integrated into the connector body.
