Skip to main content
Log in
Siemens 3VM9113-0JG11 — Molded Case Circuit Breakers (MCCB)

Siemens SENTRON 3VM9113-0JG11 Wire Connector, 10-95 mm²

MPN3VM9113-0JG11
Active

Siemens SENTRON TA1.1 wire connector, 3VM9113-0JG11, for 3VM 100/160, 10-95 mm² solid/stranded copper, 6.2-11.3 Nm torque.

Siemens 3VM9113-0JG11 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3VM9113-0JG11 — Identification
ParameterValue
Product designationaccessories
Brand / rangeSENTRON
3VM9113-0JG11 — Other specifications
ParameterValue
Solid10 mm²: 6.2 Nm 16 - 95 mm²: 11.3 Nm
Stranded8 AWG: 55 lb-in 6 - 3/0 AWG: 100 lb-in
AccessoriesWire connector
Finely stranded8 AWG: 55 lb-in 6 - 3/0 AWG: 100 lb-in
Stripped length12,2 mm
Designation (Of the terminal)TA1.1
For aluminum cable (Solid, maximum)16 mm²
For aluminum cable (Solid, minimum)10 mm²
For copper cable (Stranded, maximum)3/0 AWG
For copper cable (Stranded, minimum)8 AWG
For aluminum cable (Stranded, maximum)3/0 AWG
For aluminum cable (Stranded, minimum)12 AWG
For copper cable (Finely stranded, maximum)3/0 AWG
For copper cable (Finely stranded, minimum)8 AWG

Product details

Siemens SENTRON TA1.1 Wire Connector — 3VM9113-0JG11

The Siemens SENTRON 3VM9113-0JG11 is a TA1.1 wire connector accessory for the 3VM 100/160 molded-case circuit breaker family. It accepts copper conductors from 10 mm² up to 95 mm² solid, and 8 AWG to 3/0 AWG stranded or finely stranded — covering the full range of line and load terminations for that breaker frame. This connector also includes a control-wire voltage tap-off — useful when you need to pick off a lower-current signal from the breaker's line side without adding a separate terminal block. It ships as a set of three units, matching the 3-pole 3VM 100/160 footprint.

The 3VM9113-0JG11 has an Active lifecycle status from Siemens. It remains a current catalog item for the SENTRON accessory line.

Frequently asked questions

What is 3VM9113-0JG11's listed solid copper torque range?

Solid copper: 10 mm² at 6.2 Nm, 16-95 mm² at 11.3 Nm.

What is 3VM9113-0JG11's listed stranded copper torque range?

Stranded copper: 8 AWG at 55 lb-in, 6-3/0 AWG at 100 lb-in.

Will 3VM9113-0JG11 drop into a panel specified around 3VA2116-5HM42-0CC0 without rewiring?

No — the 3VM9113-0JG11 is a wire connector accessory for the 3VM 100/160 breaker frame, while the 3VA2116-5HM42-0CC0 is a 3VA molded-case breaker with a different terminal interface and frame size. They are not mechanically interchangeable.

MPN
3VM9113-0JG11