Skip to main content
Siemens 3VM9213-0JC22 — Molded Case Circuit Breakers (MCCB)

Siemens 3VM9213-0JC22 TA2.3 Wire Connector, 4 AWG–300 kcmil

MPN3VM9213-0JC22
Active

Siemens SENTRON TA2.3 circular conductor terminal, wire connector 2 x 25…150 mm² for 2 cables, control wire voltage tap-off, 3 units, accessories for 3VM 250.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3VM9213-0JC22 — Identification
ParameterValue
Product designationaccessories
Brand / rangeSENTRON
3VM9213-0JC22 — Other specifications
ParameterValue
Stranded4 AWG - 300 kcmil: 275 lb-in
AccessoriesWire connector
Finely stranded4 AWG - 300 kcmil: 275 lb-in
Stripped length1.0 / 2.0 in
Design of the productcircular conductor terminal
Designation (Of the terminal)TA2.3
For copper cable (Stranded, maximum)300 kcmil
For copper cable (Stranded, minimum)4 AWG
For aluminum cable (Stranded, maximum)300 kcmil
For aluminum cable (Stranded, minimum)4 AWG
For copper cable (Finely stranded, maximum)300 kcmil
For copper cable (Finely stranded, minimum)4 AWG
Type of electrical connection (With control wire tap)Yes

Product details

The Siemens 3VM9213-0JC22 is a TA2.3 circular conductor terminal — a wire connector accessory for the 3VM 250 molded case circuit breaker series. It handles two cables from 25 to 150 mm² each, with a built-in control wire voltage tap-off, and ships as a pack of three units.

Wire range and termination

The terminal accepts stranded copper from 4 AWG up to 300 kcmil, with a torque spec of 275 lb-in. Finely stranded copper in the same range is also accepted — no ferrules required for fine-strand, just clean stripping to 1.0 or 2.0 inches.

Frequently asked questions

What wire sizes does the TA2.3 terminal accept?

It accepts stranded copper and aluminum from 4 AWG to 300 kcmil, and finely stranded copper in the same range. The strip length is 1.0 or 2.0 inches, and the terminal torque spec is 275 lb-in.

MPN
3VM9213-0JC22