Skip to main content
Log in
Siemens 3VM9213-0JJ13 — Molded Case Circuit Breakers (MCCB)

Siemens SENTRON 3VM9213-0JJ13 Wire Connector TA2.2, 2 AWG-35

MPN3VM9213-0JJ13
Active

Siemens SENTRON TA2.2 circular conductor terminal, wire connector, 2 AWG - 350 kcmil (stranded), 275 lb-in torque, 1.2 in strip length, for 3VM 250 breakers.

Siemens 3VM9213-0JJ13 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3VM9213-0JJ13 — Identification
ParameterValue
Product designationaccessories
Brand / rangeSENTRON
Product versioncircular conductor terminal
3VM9213-0JJ13 — Other specifications
ParameterValue
Stranded2 AWG - 350 kcmil: 275 lb-in
AccessoriesWire connector
Finely stranded2 AWG - 350 kcmil: 275 lb-in
Stripped length1.2 in
Designation (Of the terminal)TA2.2
For copper cable (Stranded, maximum)350 kcmil
For copper cable (Stranded, minimum)2 AWG
For aluminum cable (Stranded, maximum)350 kcmil
For aluminum cable (Stranded, minimum)2 AWG
For copper cable (Finely stranded, maximum)350 kcmil
For copper cable (Finely stranded, minimum)2 AWG

Product details

Wire range and termination

The 3VM9213-0JJ13: The 1.2 in stripped length is generous — enough to fully engage the conductor barrel without leaving exposed strands past the connector body, which matters for maintaining the creepage distance inside the breaker enclosure.

Compatibility and mounting

This connector is a direct accessory for the Siemens SENTRON 3VM 250 frame. It replaces or supplements the standard line-side and load-side lugs on that breaker. No adapter plate or busbar modification is needed — it bolts directly to the breaker terminals. Packaged in a set of three units, covering the three poles of a 3VM 250 three-pole breaker. If you are retrofitting an existing panel, verify the existing lug footprint matches the TA2.2 mounting hole pattern — the 3VM 250 lug interface is consistent across the frame, but older third-party lugs may differ.

Frequently asked questions

What wire sizes does the TA2.2 connector accept?

It accepts stranded copper and aluminum from 2 AWG minimum to 350 kcmil maximum, both standard and finely stranded classes. Torque is 275 lb-in across the full range.

Which breakers is this connector compatible with?

It is designed for the Siemens SENTRON 3VM 250 frame. The pack contains three units, covering all three poles of a three-pole 3VM 250 breaker.

Where can I buy 3VM9213-0JJ13 and how is it quoted?

This part is sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time — no stock count or price is published here.

MPN
3VM9213-0JJ13