The inductance value is 0.3 mH (300 µH) per phase (cites:). It carries a DC rated current of 46.5A, reflecting the higher RMS content in DC-link applications (cites:). The part is wound for thermal class F (155°C) insulation per IEC 60085, with a total power loss split between the coil (36W) and the iron core (10W) at rated conditions and a 40°C ambient (cites:,). The relative inductive voltage drop is specified as 0% at the measurement level, meaning the choke is designed for near-zero voltage regulation under rated current and frequency — typical for commutating chokes where the primary role is di/dt limiting, not voltage transformation (cites:).
Enclosure rating is IP00 — no drip shield, no touch protection. This is an open-frame component intended for mounting inside a switchgear cabinet or converter cubicle where the enclosure provides the overall IP rating (cites:). The main circuit connections are via free cable ends, so you'll need to terminate them with ring lugs or ferrules appropriate for your wire gauge (cites:). Physical footprint: 148 mm wide, 139 mm tall, 78 mm deep — it takes up a fair chunk of panel width, so plan the DIN-rail or chassis-mount layout accordingly (cites:,).