Skip to main content
Siemens 4EP4005-8DB00

Siemens 4EP4005-8DB00 Mains Choke, 600V 60Hz 0.93A 3-Phase

MPN 4EP4005-8DB00

Siemens 4EP4005-8DB00 Netzdrossel (mains choke), 600V AC, 60Hz, 0.93A rated / 1.03A max, 0.795H, IP00, thermal class B, screw/tab terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP4005-8DB00 specifications
ParameterValue
IP ratingIP00
Depth0.143 m
Width0.219 m
Height0.179 m

Product details

The Siemens 4EP4005-8DB00 is a 3-phase mains choke (Netzdrossel) rated for 600V AC at 60Hz. It carries a rated current of 0.93A with a maximum of 1.03A and an inductance of 0.795H. The relative inductive voltage drop sits at 89% on the measurement level — that high drop tells you this choke is sized to provide significant impedance, which means it's intended for harmonic mitigation or current-limiting duty in a power circuit, not just a small filter reactor.

This choke is IP00 — no enclosure, so it mounts inside a panel or cabinet. The screw-type and tab terminals accept the main current circuit wiring. Coil losses are 38.5W and iron-core losses add 14W, for a total heat dissipation around 52.5W at full load. That's not negligible — the panel designer needs to account for that thermal load in the cabinet ventilation, especially since the choke is IP00 and relies on the surrounding air for cooling.

The 0.93A rated current at 600V 60Hz sets the continuous load limit. The 1.03A maximum is the thermal limit — do not size the choke for a motor FLA above 0.93A continuous. The 89% inductive drop means this is not a standard line reactor for general harmonic filtering; it is a high-impedance choke for specialized applications like precharge circuits or current-limiting in low-power drives. If you need a standard 3–5% impedance line reactor for a 1A drive, this is the wrong part.

MPN
4EP4005-8DB00