What this output reactor does on the line
The Siemens SIDAC 4EU2432-0EB00-0AA0 is a 3-phase output reactor rated for 360 A continuous at 690 V, with an inductance of 0.012 mH. It sits between the VFD output and the motor leads, filtering the PWM carrier to reduce motor insulation stress and bearing currents. The 4.6 kHz rated switching frequency matches common IGBT drive stages; if your drive runs a higher carrier, the reactor still attenuates but derate the current per the thermal curve above 45 °C ambient.
Fit and mounting reality
IP00 — no enclosure, so this mounts inside a panel or cabinet, not exposed. Dimensions are 0.22 m wide by 0.21 m tall by 0.13 m deep; plan for clearance around the flat-type terminals on the main circuit connection. Thermal class H per IEC 60085 means the winding insulation handles 180 °C hot-spot, which is typical for reactor duty in a closed cabinet with limited airflow. The iron-core loss of 50 W plus coil loss of 163 W total 213 W heat to vent; don't bury it against the backplate without a path out.