The Siemens 4EU3632-0MH08-0AA0 is a three-phase filter reactor rated 100 kVAR at 660 V, 50 Hz, with 5.67% impedance. It's built to EN 61558-2-20, the standard for chokes and reactors. The IP00 enclosure means it's an open-frame component — intended for mounting inside a switchgear cubicle or panel, not in a wet or dusty environment. Flat-type terminals accept busbar or cable lugs for power connections.
The 100 kVAR rating at 660 V tells you the reactive power this reactor can handle continuously at its rated voltage and frequency. The 5.67% impedance (P(%):5,67) is the voltage drop across the reactor at rated current — a standard value for harmonic filtering and motor-drive line reactors, limiting inrush and smoothing current waveforms. The 210 Hz resonant frequency (FRES(HZ):210) is the point where the reactor's impedance peaks; keep the drive's switching frequency and its harmonics away from that band to avoid resonance. The ripple voltage spec (110 /0 /6 /5) describes the voltage distortion the reactor can tolerate under different operating conditions.