Skip to main content
Log in
Siemens 4EU3652-0EC00-4BA0 — Line/Load Reactors

Siemens SIDAC 4EU3652-0EC00-4BA0 Output Reactor, 60A 3-Phase

MPN4EU3652-0EC00-4BA0

Siemens SIDAC output reactor, 3-phase AC, 60 A max, 0.3 mH, 8 kHz switching frequency, IP00, flat-type terminals.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

4EU3652-0EC00-4BA0 — Inductance & Impedance
ParameterValue
Rated inductance0.0003H
4EU3652-0EC00-4BA0 — Identification
ParameterValue
Product designationoutput reactor
4EU3652-0EC00-4BA0 — Electrical
ParameterValue
Number of phases3
Voltage typeAC
4EU3652-0EC00-4BA0 — Losses & Thermal
ParameterValue
Power loss, coil (W)76W
Power loss, iron core (W)243W
Rated ambient temperature40°C
4EU3652-0EC00-4BA0 — Approvals
ParameterValue
Thermal class (IEC 60085)H
4EU3652-0EC00-4BA0 — Mechanical
ParameterValue
Main-circuit connection typeflat connector
IP protection ratingIP00
Height0.32m
Width0.35m
Depth0.22m

Product details

What this SIDAC output reactor does

The Siemens SIDAC 4EU3652-0EC00-4BA0 is a 3-phase AC output reactor rated for 60 A maximum continuous current and 0.3 mH inductance, designed to sit between a variable-frequency drive and the motor. Its job is to limit the rate of voltage rise (dV/dt) from the drive's PWM output and reduce reflected-wave peaks on long cable runs — protecting motor winding insulation and extending bearing life. The 8 kHz switching frequency rating matches the typical carrier frequency of modern IGBT drives; running a higher carrier without derating risks core saturation and excessive heating. Power loss is 76 W in the coil and 243 W in the iron core at full rated load. IP00 open-chassis design requires free airflow.

Lifecycle status is mature. No successor has been issued. Flat-type terminals for bus-bar or cable-lug connection.

Dimensions are 0.35 m wide by 0.32 m tall by 0.22 m deep. Flat-type terminals accept bus-bar or compression lugs.

Frequently asked questions

Will 4EU3652-0EC00-4BA0 drop into a panel specified around 5SL3232-6MB?

No — those are completely different component classes. 5SL3232-6MB is a 2-pole SENTRON miniature circuit breaker (MCB) for branch-circuit protection on a DIN rail. This is a 3-phase output reactor with flat-type terminals, bolted to the panel floor, sized for drive output filtering. No footprint or wiring overlap.

MPN
4EU3652-0EC00-4BA0