Skip to main content
Siemens 5SJ4301-7HG41 — 3-Pole MCB (DIN Rail)

Siemens 5SJ4301-7HG41 SENTRON MCB, 3P, C-curve, 360 VAC, 10/

MPN5SJ4301-7HG41
Active

Siemens SENTRON 5SJ4 series, miniature circuit breaker, 3P, C-curve, 400 V AC / 60 V DC, 10 kA (EN 60898) / 15 kA (IEC 60947-2), halogen-free, silicon-free, IP20/IP40, 3 modular units.

$286.41Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SJ4301-7HG41 — Identification
ParameterValue
Brand nameSENTRON
Number of poles3
Pole configuration3P
Suitability for operationMechanical engineering / industry
5SJ4301-7HG41 — Protection
ParameterValue
Tripping characteristic (curve)C
Breaking capacity per EN 6089810 kA
Breaking capacity per IEC 60947-215 kA
Overvoltage category3
IP protection classIP20, with connected conductors, IP 40 in the handle range
Pollution degree3
5SJ4301-7HG41 — Electrical
ParameterValue
Supply frequency range50/60 Hz
Power loss per pole at rated current (AC, hot)1.7 W
Mechanical service life (operating cycles, typ.)10 000
Neutral conductor switchingNo
5SJ4301-7HG41 — Mechanical
ParameterValue
Modular width units3
Mounting positionany
Width54 mm
Height110 mm
Depth70 mm
Installation depth70 mm
Terminal tightening torque, max.75 °C
Terminal tightening torque, min.-40 °C
Combined terminal, topYes
Combined terminal, bottomYes
Fastening methodon standard mounting rail
SealableYes
Accepts supplementary devicesYes
5SJ4301-7HG41 — Environmental
ParameterValue
Halogen-freeYes
Silicone-freeYes
Vibration resistance (IEC 60068-2-6)±1 mm at 5 to 25 Hz; 50 m/s² at 25 to 150 Hz

Product details

Panel fit and ratings at a glance

The 5SJ4301-7HG41: Mounts on standard 35 mm rail, any orientation. Three modular units wide (54 mm), 70 mm deep. The IP rating reads IP20 with conductors connected, IP40 in the handle area — adequate for dry indoor panels, not for hose-down locations.

Environment B for EMC means this breaker does not have to meet immunity limits for interference — it's intended for industrial areas where conducted emissions are less strict, not for critical data centers or medical equipment. The halogen-free / silicon-free spec also supports use in confined spaces (e.g., control cabinets near sensors or PLCs) where outgassing from standard plastics could cause contact failure.

MPN
5SJ4301-7HG41