Siemens SENTRON 5SL1313-7MB miniature circuit breaker, 3-pole, C-curve, 13 A, 3 kA breaking capacity per IEC 60947-2, 3 MW units.
| Parameter | Value |
|---|---|
| Brand name | SENTRON |
| Number of poles | 3 |
| Pole configuration | 3P |
| Suitability for operation | Residential buildings/infrastructure |
| Parameter | Value |
|---|---|
| Tripping characteristic (curve) | C |
| Overvoltage category | III |
| IP protection class | IP20, with connected conductors |
| Pollution degree | 2 |
| Parameter | Value |
|---|---|
| Rated current (AC) | 13 A |
| Rated voltage (AC, multi-phase) | 440 V |
| Parameter | Value |
|---|---|
| Modular width units | 3 |
| Mounting position | any |
| Width | 54 mm |
| Height | 90 mm |
| Depth | 76 mm |
| Installation depth | 70 mm |
| Terminal tightening torque, max. | 75 °C |
| Terminal tightening torque, min. | -40 °C |
| Sealable | Yes |
| Parameter | Value |
|---|---|
| Halogen-free | Yes |
| Silicone-free | Yes |
It interrupts faults up to 3 kA per IEC 60947-2 and 4.5 kA per EN 60898 — the 3 kA figure governs the worst-case industrial fault current it can clear without upstream damage.
Halogen-free and silicon-free construction matters in environments where off-gassing from a fault could contaminate nearby electronics or sensitive processes.
Submit an RFQ through this listing. Pricing and stock are confirmed at quote time — no automatic figures are published here.
The depth is 76 mm, with an installation depth of 70 mm. It occupies three modular-width units (54 mm) on a DIN rail.
Yes — same DIN-rail footprint (3 MW, 54 mm wide, 76 mm deep), same SENTRON series, same mounting position. The 5SL3340-7CC is a 40 A C-curve MCB; swapping to the 13 A unit requires checking the downstream load rating and coordination, but the mechanical fit is identical.
No related articles