Siemens SENTRON 5SL3020-7 miniature circuit breaker, 1P+N, C-curve, 4.5 kA per IEC/EN 60898-1, 230 V AC, 18 mm width, DIN rail mount.
| Parameter | Value |
|---|---|
| Product designation | Miniature circuit breaker |
| Brand name | SENTRON |
| Pole design | 1P+N |
| Application suitability | Residential buildings/infrastructure |
| Parameter | Value |
|---|---|
| Tripping characteristic class | C |
| Energy limitation class | 3 |
| Overvoltage category | III |
| Parameter | Value |
|---|---|
| Mounting position | any |
| Fastening method | DIN rail |
| Combined terminal, top | No |
| Combined terminal, bottom | No |
| Width | 18 mm |
| Height | 90 mm |
| Depth | 76 mm |
| Installation depth | 70 mm |
| Modular width units | 1 |
| Torque, min. | -40 °C |
| Torque, max. | 75 °C |
| Sealable | Yes |
| Parameter | Value |
|---|---|
| IP protection class | IP20, with connected conductors |
| Pollution degree | 2 |
| Halogen-free | Yes |
| Silicone-free | Yes |
It is rated for 230 V AC single-phase operation and carries a 4.5 kA breaking capacity tested to IEC/EN 60898-1 and GB/T 10963.1, so it safely clears a fault up to that level in a residential or light-commercial distribution board.
Snaps onto standard DIN rail (fastening method per) and accepts any mounting position. The 1P+N design occupies one modular width unit (18 mm), so it replaces a standard single-pole MCB plus a separate neutral block, saving rail space.
Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock count or lead-time number is published here.
Both parts share the same DIN-rail footprint and 18 mm width, so mechanical fit is identical. The 5SL3020-7 is 1P+N (switched neutral), while the 5SY6006-7 is a single-pole device — verify that the panel wiring expects a switched neutral before substitution.
The breaker is certified to IEC/EN 60898-1 and GB/T 10963.1. It is halogen-free and silicon-free. Standard Siemens documentation includes a declaration of conformity; check with your Siemens channel partner for specific RoHS/REACH statements if required.
No related articles