Skip to main content
Siemens 5SL3205-7MB — 2-Pole MCB (DIN Rail)

Siemens 5SL3205-7MB SENTRON MCB, 2-pole C-curve 0.5 A, 400 V

MPN5SL3205-7MB
Active

Siemens SENTRON 5SL miniature circuit breaker, 2-pole, C characteristic, 0.5 A rated current, 400 V AC, 4.5 kA breaking capacity per EN 60898, 36 mm wide, IP20.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SL3205-7MB — Identification
ParameterValue
Product designationMiniature circuit breaker
Brand nameSENTRON
Application environmentResidential buildings/infrastructure
5SL3205-7MB — Electrical
ParameterValue
Number of poles2
5SL3205-7MB — Protection
ParameterValue
Tripping characteristic classC
Overvoltage categoryIII
5SL3205-7MB — Mechanical
ParameterValue
Modular width units2
Width36 mm
Height90 mm
Depth76 mm
Installation depth70 mm
Mounting positionany
Min.-40 °C
Max.75 °C
Protection degree (IP)IP20, with connected conductors
5SL3205-7MB — Environmental
ParameterValue
Pollution degree2
5SL3205-7MB — Specifications
ParameterValue
Energy Limitation ClassNo

Product details

The Siemens SENTRON 5SL3205-7MB is a 2-pole miniature circuit breaker (MCB) with a C tripping characteristic, rated at 0.5 A and 400 V AC. The IP20 rating applies with conductors connected — typical for enclosed distribution boards.

C-curve and 0.5 A rating — what that means on the line

C characteristic (5–10× In magnetic trip) suits moderate inrush loads. At 0.5 A, this is a low-current branch breaker. 10 000 mechanical switching cycles typical. Rated voltage is 400 V AC for multi-phase operation, with a maximum of 440 V AC. Single-phase operation is rated at 250 V AC. The DC rating maxes out at 72 V — if you need DC-side protection at higher voltages, this is not the breaker for that rail.

Sealable design. Halogen-free and silicon-free.

Frequently asked questions

Will the 5SL3205-7MB fit a panel designed for the 5SL6132-6MB?

Yes, both are 2-pole, 36 mm wide (2 MW) SENTRON 5SL breakers with the same DIN-rail footprint and terminal layout. No rewiring or enclosure modification is needed for the swap.

MPN
5SL3205-7MB