Skip to main content
Siemens 5SL3510-7 — 1-Pole MCB (DIN Rail)

Siemens 5SL3510-7 SENTRON MCB, 1P+N, C-curve, 10 A, 4.5 kA

MPN5SL3510-7

Siemens SENTRON 5SL3510-7, miniature circuit breaker, 1P+N, C-curve, 10 A, 4.5 kA per EN 60898, 230 V AC, 2 MW units.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SL3510-7 — Identification
ParameterValue
Product designationMiniature circuit breaker
Brand nameSENTRON
Number of poles2
Pole design1P+N
Application suitabilityResidential buildings/infrastructure
5SL3510-7 — Electrical & Protection
ParameterValue
Tripping characteristic classC
Rated value (EN 60898)4.5 kA
Energy limitation class3
Overvoltage categoryIII
5SL3510-7 — Mounting & Connection
ParameterValue
Mounting positionany
Width36 mm
Height90 mm
Depth76 mm
Installation depth70 mm
Modular width units2
Torque, min.-40 °C
Torque, max.75 °C
SealableYes
5SL3510-7 — Environmental
ParameterValue
IP protection classIP20, with connected conductors
Pollution degree2
Halogen-freeYes
Silicone-freeYes

Product details

The C-curve tripping characteristic (rated 10 A at 30 °C, per) means it holds up to 5–10× rated current for short overloads and trips magnetically on higher faults; it is sized for loads with moderate inrush, such as lighting banks, small motor circuits, or general socket outlets. The breaking capacity is 4.5 kA per EN 60898 and 5 kA per IEC 60947-2 — adequate for most domestic and light commercial installations where the prospective short-circuit current stays under those thresholds. At 40 °C the continuous rating derates to 9.39 A, at 45 °C to 9 A, and at 55 °C to 8.4 A; if the panel ambient runs hot, factor the derating into the load schedule.

The 5SL3510-7 occupies 2 modular width units (36 mm,) on a DIN rail, with a depth of 76 mm and an installation depth of 70 mm. Mounting position is unrestricted. Touch protection is built in. The neutral conductor is switched internally, so no separate neutral-link breaker is needed for the protected circuit.

Frequently asked questions

What is the breaking capacity of 5SL3510-7?

4.5 kA per EN 60898 and 5 kA per IEC 60947-2. The higher IEC rating applies when the breaker is installed per that standard's requirements.

Where can I buy 5SL3510-7?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

Does 5SL3510-7 switch the neutral?

Yes, it is a 1P+N design with neutral conductor switching. Both the live and neutral poles open on a fault or when manually switched off.

MPN
5SL3510-7