Skip to main content
Siemens 5SL3563-7 — 1-Pole MCB (DIN Rail)

Siemens 5SL3563-7 SENTRON MCB, C-63 A, 1P+N, 4.5 kA

MPN5SL3563-7

Siemens SENTRON 5SL3563-7, miniature circuit breaker, 1P+N, C-curve, 63 A rated at 30 °C, 4.5 kA breaking capacity per EN 60898 / IEC 60947-2, 230 V AC, 2 modular width units.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SL3563-7 — Identification
ParameterValue
Product designationMiniature circuit breaker
Brand nameSENTRON
Number of poles2
Pole design1P+N
Application suitabilityResidential buildings/infrastructure
5SL3563-7 — Electrical & Protection
ParameterValue
Tripping characteristic classC
Rated value (EN 60898)4.5 kA
Energy limitation class3
Overvoltage categoryIII
5SL3563-7 — Mounting & Connection
ParameterValue
Mounting positionany
Width36 mm
Height90 mm
Depth76 mm
Installation depth70 mm
Modular width units2
Torque, min.-40 °C
Torque, max.75 °C
SealableYes
5SL3563-7 — Environmental
ParameterValue
IP protection classIP20, with connected conductors
Pollution degree2
Halogen-freeYes
Silicone-freeYes

Product details

What it is and what it does

The Siemens SENTRON 5SL3563-7 is a 1-pole + neutral miniature circuit breaker (MCB) with a C tripping characteristic, rated 63 A at 30 °C and 230 V AC. It provides overcurrent and short-circuit protection in residential and infrastructure distribution boards, with a breaking capacity of 4.5 kA per EN 60898 and IEC 60947-2. The C-curve means it trips between 5 and 10 times rated current — suited for circuits with moderate inrush, like lighting banks or small motor loads.

Key ratings and what they mean for fit

The 63 A rating holds at 30 °C ambient; at 40 °C it derates to 59.18 A, at 45 °C to 57.96 A, and at 55 °C to 52.93 A. If your panel runs warm (common in crowded enclosures), you need to account for that derating — the 63 A label is the 30 °C figure, not the installed capacity. The 4.5 kA breaking capacity applies to both EN 60898 (household) and IEC 60947-2 (industrial) standards, so the same part works for residential boards and light industrial sub-distribution. Overvoltage category III and pollution degree 2 mean it's rated for fixed-installation mains supply, not for outdoor or wet locations.

Integration and mounting notes

Snaps onto standard 35 mm DIN rail. It occupies 2 modular width units (36 mm total width). The 76 mm depth and 70 mm installation depth fit standard distribution enclosures; no special clearance needed beyond the usual front-access wiring space. Neutral conductor is switched internally (1P+N design), so you don't need a separate neutral bar for the protected circuit. Any mounting position is allowed, which simplifies panel layout.

Environmental and compliance details

Halogen-free and silicon-free construction — relevant for installations in sensitive environments like hospitals or data centers where corrosive off-gassing during a fault must be minimized. Sealable terminals allow the installer to lock the cover after commissioning, preventing tampering. Touch protection is built in. Operating temperature range spans -40 °C to 75 °C, covering heated indoor panels and unheated outdoor cabinets alike.

Frequently asked questions

Where can I buy 5SL3563-7?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the breaking capacity of 5SL3563-7?

The breaking capacity is 4.5 kA per both EN 60898 and IEC 60947-2, making it suitable for residential and light industrial installations.

What is the difference between 5SL3563-7 and 5SL6550-7BB?

The 5SL6550-7BB is a 50 A B-curve MCB, while the 5SL3563-7 is a 63 A C-curve. The C-curve handles higher inrush (5-10x rated) compared to B-curve (3-5x). Both are 1P+N SENTRON units with the same 4.5 kA breaking capacity and 2-module width, so they share the same DIN-rail footprint and wiring space.

MPN
5SL3563-7