Siemens SENTRON 5SL4116-7, 1-pole miniature circuit breaker, C-curve, 16 A, 10 kA breaking capacity per EN 60898 and IEC 60947-2, 1 MW width.
| Parameter | Value |
|---|---|
| Product designation | Miniature circuit breaker |
| Brand name | SENTRON |
| Number of poles | 1 |
| Pole design | 1P |
| Application suitability | Residential buildings/infrastructure |
| Parameter | Value |
|---|---|
| Tripping characteristic class | C |
| Energy limitation class | 3 |
| Overvoltage category | III |
| Parameter | Value |
|---|---|
| Mounting position | any |
| Width | 18 mm |
| Height | 90 mm |
| Depth | 76 mm |
| Installation depth | 70 mm |
| Modular width units | 1 |
| Torque, min. | -40 °C |
| Torque, max. | 75 °C |
| Sealable | Yes |
| Parameter | Value |
|---|---|
| IP protection class | IP20, with connected conductors |
| Pollution degree | 2 |
| Halogen-free | Yes |
| Silicone-free | Yes |
The Siemens SENTRON 5SL4116-7 is a 1-pole miniature circuit breaker rated 16 A with a C tripping characteristic and a 10 kA breaking capacity per both EN 60898 and IEC 60947-2.
The 10 kA breaking capacity at 230/400 V AC is the same under both EN 60898 and IEC 60947-2 — that means it can safely interrupt a fault current up to 10 kA without welding the contacts or cascading damage upstream. Sealable design allows locking the toggle in the OFF position for lockout/tagout compliance.
The 5SL4116-7 is sourced to order against an RFQ through independent distribution; availability and current pricing are confirmed at quote time.
The 5SL4363-7 is a 3-pole version of the same SENTRON series with the same C-curve and 10 kA rating, but it occupies 3 MW (54 mm) and cannot drop into a 1-pole slot without rewiring the panel.
The 5SL4116-7 has a depth of 76 mm and an installation depth of 70 mm.
The 5SL4116-7 has a width of 18 mm, which is one modular unit (1 MW).
No — the 5SL4363-7 is a 3-pole breaker (3 MW wide), while the 5SL4116-7 is a 1-pole breaker (1 MW wide). The physical footprint and wiring differ; a panel designed for the 3-pole unit would need rewiring and a different DIN-rail layout to accept the 1-pole unit.
No related articles