Skip to main content
Log in
Siemens 5SL4601-7CC — 4-Pole MCB (DIN Rail)

5SL4601-7CC SENTRON MCB 4P C-curve 1A 10kA 400V

MPN5SL4601-7CC
Active

Siemens SENTRON 5SL miniature circuit breaker, 5SL4601-7CC, 4-pole (3P+N), C tripping characteristic, 1 A rated current, 10 kA breaking capacity per EN 60898 at 400 V AC, 4 width units.

Siemens 5SL4601-7CC datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SL4601-7CC — Identification
ParameterValue
Type / order code5SL4CC
Brand nameSENTRON
Application suitabilityResidential buildings/infrastructure
5SL4601-7CC — Ratings
ParameterValue
Number of poles4
Pole configuration3P+N
Rated current (In), AC1 A
Rated voltage, AC (multi-phase)440 V
Voltage typeAC
Rated frequency50 Hz
5SL4601-7CC — Protection
ParameterValue
Tripping characteristic (trip curve)C
Rated breaking capacity (Icn), per EN 6089810 kA
Overvoltage category3
Degree of protection (IP)IP20, with connected conductors
Neutral conductor switchingYes
Touch protectionYes
5SL4601-7CC — Mechanical
ParameterValue
Width in modular units4
Width72 mm
Height90 mm
Depth76 mm
Installation depth70 mm
Mounting positionany
Tightening torque, max.25 mm²
Tightening torque, min.0.75 mm²
SealableYes
5SL4601-7CC — Environmental
ParameterValue
Halogen-freeYes
Silicone-freeYes
Influence of ambient temperature (derating)+55 °C, max. 95% humidity

Product details

The Siemens SENTRON 5SL4601-7CC is a 4-pole miniature circuit breaker (3P+N) with a C tripping characteristic, rated 1 A at 400 V AC.

The 4-pole (3P+N) configuration switches all three phases and the neutral. The neutral pole is switched but not protected — it opens and closes with the phases but has no overcurrent trip. This is the common arrangement for TN and TT systems where you want to isolate the neutral during maintenance. Terminals accept 0.75 to 25 mm² — enough for the incoming feed and outgoing sub-circuits.

Any mounting position is permitted. Halogen-free and silicon-free construction — no corrosive off-gassing in a fire, which matters for equipment rooms with sensitive electronics or where smoke toxicity is a concern.

Frequently asked questions

What is the difference between 5SL4601-7CC and the 5SL6606-7YA?

The 5SL6606-7YA is a 6 A, C-curve, 4-pole MCB with a lower 6 kA breaking capacity at 400 V (vs. 10 kA for the 5SL4601-7CC). It also lacks the sealable feature and touch protection. Physically the same footprint (72×76×90 mm), so it drops into the same DIN-rail slot — but the amp rating and fault-clearing capability are different; do not substitute without verifying the branch load and available fault current.

Where can I buy the 5SL4601-7CC?

Sourced and quoted to order against an RFQ through our independent distribution network. Availability and current pricing are confirmed at quote time — submit a request with your target quantity and delivery window.

What compliance documentation is available for 5SL4601-7CC?

The breaker is designed and tested to EN 60898 (10 kA breaking capacity at 400 V). It carries the CE mark for the European market. RoHS and REACH compliance is standard for Siemens SENTRON products, though the specific declaration should be requested at quote time if required for your compliance file.

MPN
5SL4601-7CC