Skip to main content
Siemens 5SL5206-7CC

Siemens 5SL5206-7CC SENTRON MCB, 2P C6, 250V DC, 10kA

MPN 5SL5206-7CC

Siemens SENTRON 5SL5206-7CC, 2-pole miniature circuit breaker, C-curve, 6 A rated, 250 V DC, 10 kA breaking capacity.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SL5206-7CC specifications
ParameterValue
Poles2
IP ratingIP20
Depth76 mm
Width36 mm
Height90 mm

Product details

What it is and what it does

The Siemens 5SL5206-7CC is a 2-pole miniature circuit breaker from the SENTRON family, rated 6 A with a C tripping characteristic, designed specifically for DC circuits up to 250 V DC with a 10 kA breaking capacity. That C-curve means it handles moderate inrush — think small DC motor drives, control transformers, or capacitor banks on a DC bus — without nuisance tripping, while still clearing a hard short fast. The 10 kA interrupting rating is the fault current it can safely stop; if your available fault current at the panel exceeds that, you need an upstream current-limiting device or a higher-rated breaker. It's built for residential and infrastructure DC distribution — solar combiner boxes, telecom rectifier cabinets, DC-coupled battery storage, or railway auxiliary supplies. The IP20 rating (with conductors connected) means it's intended for enclosed panel mounting, not wet or dusty environments. Snap it onto a DIN rail in any orientation — the mounting position is unrestricted — and it occupies 2 modular width units (36 mm total).

Physical fit and panel integration

At 36 mm wide (2 MW), 76 mm deep, and 90 mm tall, this breaker fits a standard DIN-rail enclosure bay. The 70 mm installation depth leaves room behind the rail for wiring channels or busbars. Halogen-free and silicon-free construction matters if this goes into a ventilated enclosure near sensitive electronics — no corrosive off-gassing if the breaker arcs internally. It accepts supplementary devices (auxiliary switches, shunt trips, alarm contacts) via the add-on slot on the right side — handy for remote status monitoring or emergency shutdown circuits without replacing the breaker.

Environmental and compliance notes

Rated for overvoltage category III and pollution degree 2 — standard for fixed-installation distribution boards where transients are controlled but not suppressed. The sealable design allows lockout/tagout without a separate padlock adapter. Operating temperature range from -40 °C to +75 °C covers most outdoor cabinet and unheated utility room conditions.

MPN
5SL5206-7CC