Rated single-phase at 250 V and multi-phase at 440 V AC, with a max 72 V DC for DC circuits if needed. Mounts in any position, IP20 with conductors connected, so it lives inside a distribution board or panel.
Snaps onto DIN rail, 18 mm per pole, so it takes up one width unit. Sealable per the spec, halogen-free and silicon-free construction. Rated for pollution degree 2, overvoltage category III, vibration resistance of 50 m/s² at 25 to 150 Hz per IEC 60068-2-6.
Compared to the 5SL4106-7CC, the 5SL6102-6CC shares the same 1-pole, B-curve, 2 A, 6 kA footprint — 18 mm wide, same depth. The difference is in the accessory interface: the 5SL6CC accepts the newer 5ST3 series auxiliaries and shunt trips, while the 5SL4 series uses the older 5ST1 accessories. If your panel is already built around 5SL4 breakers and you have spare accessories, the 5SL6102-6CC will physically drop into the same DIN rail slot and wire the same way, but your spare aux contacts won't clip on without an adapter.