Skip to main content
Siemens 5SL6332-7MB — 3-Pole MCB (DIN Rail)

Siemens 5SL6332-7MB SENTRON MCB, 3P C 32A 6kA 400V

MPN5SL6332-7MB
Active

Siemens SENTRON 5SL6332-7MB miniature circuit breaker, 3-pole, C-curve, 32 A, 6 kA breaking capacity at 400 V AC, 3 MW units wide.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SL6332-7MB — Identification
ParameterValue
Brand nameSENTRON
Number of poles3
Pole configuration3P
Suitability for operationResidential buildings/infrastructure
5SL6332-7MB — Protection
ParameterValue
Tripping characteristic (curve)C
Breaking capacity per EN 608986 kA
Overvoltage categoryIII
IP protection classIP20, with connected conductors
Energy limitation class3
Pollution degree2
5SL6332-7MB — Electrical
ParameterValue
Rated voltage (AC, multi-phase)440 V
Voltage type (AC/DC)AC
Supply frequency range50/60 Hz
Power loss per pole at rated current (AC, hot)2.5 W
Mechanical service life (operating cycles, typ.)10 000
Rated voltage (AC, single-phase)250 V
5SL6332-7MB — Mechanical
ParameterValue
Modular width units3
Mounting positionany
Width54 mm
Height90 mm
Depth76 mm
Installation depth70 mm
Terminal tightening torque, max.75 °C
Terminal tightening torque, min.-40 °C
SealableYes
Accepts supplementary devicesYes
5SL6332-7MB — Environmental
ParameterValue
Halogen-freeYes
Silicone-freeYes

Product details

The Siemens 5SL6332-7MB is a SENTRON miniature circuit breaker, 3-pole, C-curve, rated 32 A with a 6 kA breaking capacity per EN 60898 at 400 V AC.

Lifecycle status is Active per the manufacturer, so this is a current-production part — no last-time-buy window, no obsolescence risk on a new BOM line.

The C-curve (tripping characteristic class C) means the breaker holds 5–10× rated current for short periods before instant tripping — the standard choice for motor-starter and lighting circuits where inrush is moderate. The 6 kA breaking capacity at 400 V AC (per EN 60898) covers most residential and light-commercial fault levels; for higher available fault current, the sibling 5SL4363-7 offers 10 kA per both EN 60898 and IEC 60947-2, at the same 3-pole 32 A C-curve rating and identical 54 mm footprint.

Ambient range -40 to 75 °C covers most indoor and sheltered outdoor cabinets. Accepts supplementary auxiliary devices (shunt trip, alarm switch, auxiliary contact) on the right side.

Power loss per pole at rated current in hot state is 2.5 W — 7.5 W total for the 3-pole assembly, relevant for thermal budgeting in a multi-breaker panel. Halogen-free and silicon-free construction; sealable option available.

Frequently asked questions

Will 5SL6332-7MB drop into a panel specified for 5SL4363-7?

Yes, the 5SL6332-7MB shares the same 54 mm width (3 MW), 76 mm depth, 70 mm installation depth, and DIN-rail mounting as the 5SL4363-7 — no rewiring or panel modification needed for a drop-in replacement.

What compliance documentation is available for 5SL6332-7MB?

The SENTRON series carries CE marking per the Low Voltage Directive; RoHS and REACH compliance is standard for current-production Siemens MCBs. Specific declarations are provided with the shipment documentation.

MPN
5SL6332-7MB