Siemens SENTRON 5SL6510-7CC miniature circuit breaker, 2-pole, C-curve, 10 A rated current, 6 kA breaking capacity per EN 60898, 230 V AC, 2 MWUs wide.
| Parameter | Value |
|---|---|
| Product designation | Miniature circuit breaker |
| Brand name | SENTRON |
| Application environment | Residential buildings/infrastructure |
| Parameter | Value |
|---|---|
| Number of poles | 2 |
| Parameter | Value |
|---|---|
| Tripping characteristic class | C |
| Overvoltage category | III |
| Parameter | Value |
|---|---|
| Modular width units | 2 |
| Width | 36 mm |
| Height | 90 mm |
| Depth | 76 mm |
| Installation depth | 70 mm |
| Mounting position | any |
| Min. | -40 °C |
| Max. | 75 °C |
| Protection degree (IP) | IP20, with connected conductors |
| Parameter | Value |
|---|---|
| Pollution degree | 2 |
| Parameter | Value |
|---|---|
| Energy Limitation Class | 3 |
Rated current is 10 A at 30 °C, but derates to 9.43 A at 40 °C and 8.51 A at 55 °C. The breaker is rated for 230 V AC (250 V single-phase) and up to 72 V DC, so it can also switch DC control circuits within that voltage ceiling.
Touch protection is built in. The breaker is sealable, halogen-free, and silicon-free — relevant for clean-room or food-processing panels where outgassing matters.
6 kA per EN 60898 at 230 V AC. That is the standard residential and light-commercial fault level — adequate for most panelboards but not for high-fault industrial mains.
The C characteristic trips between 5 and 10 times rated current (50–100 A for this 10 A unit). It is a good match for loads with moderate inrush, such as small motors, transformers, or capacitor banks.
Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock or price figures are published here.
No related articles