Skip to main content
Log in
Siemens 5SL7306-8RC — 3-Pole MCB (DIN Rail)

Siemens Betagard 5SL7306-8RC MCB, 3P D 6A, 15kA EN 60898

MPN5SL7306-8RC

Siemens Betagard miniature circuit breaker, 3-pole, D-curve, 6 A, 415 V AC, 15 kA (EN 60898) / 20 kA (IEC 60947-2), 3 modular width units.

Siemens 5SL7306-8RC datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SL7306-8RC — Identification
ParameterValue
Brand nameBetagard
Number of poles3
Pole configuration3P
Suitability for operationIndustry
5SL7306-8RC — Protection
ParameterValue
Tripping characteristic (curve)D
Breaking capacity per EN 6089815 kA
Breaking capacity per IEC 60947-220 kA
Overvoltage categoryIII
IP protection classIP20, with connected conductors
Pollution degree2
5SL7306-8RC — Electrical
ParameterValue
Rated voltage (AC, multi-phase)440 V
Voltage type (AC/DC)AC
Supply frequency range50/60 Hz
Power loss per pole at rated current (AC, hot)1.5 W
Mechanical service life (operating cycles, typ.)10 000
Rated voltage (AC, single-phase)440 V
5SL7306-8RC — Mechanical
ParameterValue
Modular width units3
Mounting positionany
Width18 mm
Height90 mm
Depth76 mm
Installation depth70 mm
Terminal tightening torque, max.75 °C
Terminal tightening torque, min.-40 °C
SealableYes
5SL7306-8RC — Environmental
ParameterValue
Halogen-freeYes
Silicone-freeYes
Vibration resistance (IEC 60068-2-6)yes

Product details

What the D-curve and breaking capacity mean for your panel

The Siemens Betagard 5SL7306-8RC is a 3-pole miniature circuit breaker with a D tripping characteristic, rated 6 A at 415 V AC. Breaking capacity is 15 kA per EN 60898 and 20 kA per IEC 60947-2, so it clears high-fault currents in industrial distribution without cascading upstream. The 18 mm width per pole (3 modular units total) snaps onto a standard DIN rail, and the 76 mm depth leaves room for wiring behind the gland plate.

Where it fits — panel integration and environment

Vibration-rated per IEC 60068-2-6, which matters for machine-mounted sub-panels on conveyors or compressors.

Compliance and documentation signals

Sealable design allows lockout/tagout. The Betagard brand is Siemens' value line for commercial and light industrial panels, distinct from the SENTRON residential range.

Frequently asked questions

What is the breaking capacity of 5SL7306-8RC?

15 kA per EN 60898 and 20 kA per IEC 60947-2 at 415 V AC.

Will 5SL7306-8RC drop into a panel specified around 5SL4363-7 without rewiring?

The 5SL7306-8RC is 18 mm wide (3 modular units), while the 5SL4363-7 is 54 mm wide (also 3 modular units) — same footprint. Both are 3-pole, same depth (76 mm) and height (90 mm), same DIN-rail mounting. The key difference is the D-curve vs C-curve and the higher breaking capacity on the Betagard (15/20 kA vs 10 kA). No rewiring needed for the busbar or load connections, but verify the trip curve matches your load type.

Where can I buy 5SL7306-8RC?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing confirmed at quote time.

MPN
5SL7306-8RC