Skip to main content
Siemens 5SN6202-8CP

Siemens 5SN6202-8CP MCB, 2-pole, 400 V, 6/30 kA

MPN 5SN6202-8CP

Siemens SENTRON 5SN series miniature circuit breaker, 2-pole, 400 V AC, 6 kA (EN 60898) / 30 kA (IEC 60947-2), 36 mm wide, -40 to 75 °C.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SN6202-8CP specifications
ParameterValue
Poles2
Depth76 mm
Width36 mm
Height90 mm

Product details

The Siemens 5SN6202-8CP is a 2-pole miniature circuit breaker from the SENTRON 5SN series, rated for 400 V AC supply at 50 Hz. It carries a 6 kA interrupting capacity per EN 60898 and a 30 kA rating per IEC 60947-2, meaning it can handle fault currents up to 30 kA in industrial panels where the upstream transformer or bus can deliver that energy — the higher IEC figure is the one that governs fit in a plant-floor distribution board.

Temperature range and installation

Rated for -40 °C to 75 °C ambient, so it survives a hot panel next to a motor starter or a cold warehouse unheated section. The 70 mm installation depth and 90 mm height fit standard 8-inch deep enclosures; the 35 mm² solid conductor capacity on the terminals handles the incoming feed for a sub-distribution board.

Power loss and DC capability

For DC circuits, the breaker is rated to 72 V maximum, so it can switch a 48 V or 60 V DC control bus but not a 125 V DC battery bank.

MPN
5SN6202-8CP