Skip to main content
Log in
Siemens 5SN6332-8CP — 3-Pole MCB (DIN Rail)

Siemens 5SN6332-8CP MCB, 3-Pole, 400 V AC, 6 kA EN 60898

MPN5SN6332-8CP

Siemens SENTRON 5SN series MCB, 3-pole, 400 V AC, 6 kA (EN 60898) / 15 kA (IEC 60947-2), 50 Hz, 3 modular width units.

Siemens 5SN6332-8CP datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SN6332-8CP — Identification
ParameterValue
Number of poles3
5SN6332-8CP — Protection
ParameterValue
Breaking capacity per EN 608986 kA
Breaking capacity per IEC 60947-215 kA
5SN6332-8CP — Electrical
ParameterValue
Rated voltage (AC, multi-phase)440 V
Power loss per pole at rated current (AC, hot)2.1 W
Mechanical service life (operating cycles, typ.)10 000
Rated voltage (AC, single-phase)440 V
5SN6332-8CP — Mechanical
ParameterValue
Modular width units3
Width54 mm
Height90 mm
Depth76 mm
Installation depth70 mm
Terminal tightening torque, max.75 °C
Terminal tightening torque, min.-40 °C

Product details

The Siemens 5SN6332-8CP is a 3-pole miniature circuit breaker (MCB) from the SENTRON 5SN series, rated for 400 V AC at 50 Hz. It provides overcurrent protection with a breaking capacity of 6 kA according to EN 60898 and 15 kA according to IEC 60947-2 — the higher IEC figure means it can safely interrupt fault currents up to 15 kA in industrial panels where the prospective short-circuit current is higher than residential-grade 6 kA.

Accepts solid conductors up to 35 mm² at the terminals. The -40 to 75 °C ambient range covers unheated enclosures and hot panel interiors alike.

Listed as current production.

MPN
5SN6332-8CP