SENTRON, 5SP Miniature circuit breakers, 5SP4350-7, 3-pole, C-curve, 50 A, 400 V AC, 10 kA (EN 60898) / 20 kA (IEC 60947-2).
| Parameter | Value |
|---|---|
| Product designation | Miniature circuit breaker |
| Brand name | SENTRON |
| Parameter | Value |
|---|---|
| Number of poles | 3 |
| Parameter | Value |
|---|---|
| Tripping characteristic class | C |
| Parameter | Value |
|---|---|
| Installation depth | 70 mm |
| Parameter | Value |
|---|---|
| Tunnel terminals top | Yes |
| Design of the product | 5SP Miniature circuit breakers |
| Number of poles (Note) | 2P |
| Tunnel terminals bottom | Yes |
| Circuit-breaker (Design) | 5SP4 |
| Current (at AC) | 50 A |
| Acc. to EN 60898 / rated value | 10 kA |
| Acc. to IEC 60947-2 / rated value | 20 kA |
| Supply voltage (at AC) | 400 V |
The SENTRON 5SP4350-7 is a 3-pole miniature circuit breaker from the 5SP4 design series, rated 50 A at 400 V AC with a C tripping characteristic. The C-curve means it tolerates moderate inrush currents — typical for motor, transformer, and lighting loads — before tripping magnetically on short-circuit.
The 5SP4350-7 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.
The 5SL4363-7 is the closest peer in the SENTRON family: also 3-pole, C-curve, 400 V AC, 70 mm installation depth, and 10 kA breaking capacity per EN 60898. The key difference is the 5SL4363-7 is rated 63 A versus the 5SP4350-7's 50 A, and its IEC 60947-2 breaking capacity is 10 kA (not 20 kA). Both use tunnel terminals and occupy three modular width units, so the 5SL4363-7 drops into the same panel footprint without rewiring — just verify the higher ampacity matches the circuit protection requirements.
Yes — both share the same 70 mm installation depth, 3-pole DIN-rail footprint, tunnel terminals, and 400 V AC rating. The swap is mechanical and electrical drop-in, provided the 50 A rating of the 5SP4350-7 is adequate for the load.
The 5SP4350-7 is designed and tested to EN 60898 (10 kA breaking capacity) and IEC 60947-2 (20 kA breaking capacity). As a SENTRON-branded Siemens product, standard compliance documentation including CE declaration of conformity and manufacturer's test certificates is available. Specific RoHS/REACH status should be confirmed at order time through the supplier.