Skip to main content
Siemens 5SU1346-6FP13 — Residual Current Breakers (RCCB/RCBO)

Siemens 5SU1346-6FP13 SENTRON RCBO, 4P, 13A, 30mA, Type A, B

MPN5SU1346-6FP13
Active

Siemens SENTRON RCBO, 4-pole, 13 A rated current, 30 mA residual current, Type A, tripping characteristic B, 6 kA breaking capacity per EN 60898 / IEC 60947-2, order code 5SU1346-6FP13.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SU1346-6FP13 — Electrical Ratings
ParameterValue
Number of poles4
Overvoltage categoryIII
5SU1346-6FP13 — Identification
ParameterValue
Product designationRCBO
Product design / constructionInstantaneous
5SU1346-6FP13 — Mechanical
ParameterValue
Mounting positionAny
Width in modular units4
Maximum70 °C
Minimum-40 °C
Width72 mm
Height85 mm
Depth72 mm
Installation depth70 mm
5SU1346-6FP13 — Environmental
ParameterValue
IP degree of protectionIP20, if the distribution board is installed, with connected conductors
5SU1346-6FP13 — Electrical
ParameterValue
Tripping Characteristic ClassB

Product details

The Siemens 5SU1346-6FP13 is a 4-pole RCBO (residual current circuit breaker with overcurrent protection) from the SENTRON series, combining a Type A residual current device (30 mA trip) and a B-curve miniature circuit breaker (13 A rated) in one 4-module-width unit. It protects against earth faults and overloads/short circuits in a single device, saving a DIN-rail position over separate RCD and MCB. Rated 13 A at 30 °C, it derates to 12.2 A at 40 °C and 10.3 A at 60 °C — the 40 °C figure is the one to use for panel sizing in a ventilated enclosure.

Touch protection is built in. IP20 rating applies once installed with conductors connected inside a distribution board — not for wet or outdoor exposed locations.

This is a standard SENTRON catalog line, widely specified across European and Middle Eastern distribution boards.

Frequently asked questions

Does the 5SU1346-6FP13 fit a standard DIN-rail panel?

Yes, it occupies 4 modular width units (72 mm wide) on a DIN rail with a depth of 72 mm and an installation depth of 70 mm.

MPN
5SU1346-6FP13