Skip to main content
Siemens 5SU1346-7FP13

Siemens SENTRON 5SU1346-7FP13 RCBO, 4P C13 30mA Type A, 6kA

MPN 5SU1346-7FP13
Active

Siemens SENTRON 5SU1346-7FP13 RCBO, 4-pole, 13 A rated, C tripping characteristic, 30 mA Type A residual current, 6 kA breaking capacity per EN 60898, 4 MW width, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SU1346-7FP13 specifications
ParameterValue
Poles4
Depth72 mm
Width72 mm
Height85 mm
Energy limitation class3

Product details

Siemens SENTRON 5SU1346-7FP13 — 4-pole RCBO, 13 A C-curve, 30 mA Type A

The 4 MW (72 mm) width and IP20 finger-safe terminals mean it snaps into a standard 4-module DIN-rail slot in a consumer unit or panelboard.

At 13 A rated current, the RCBO handles continuous loads up to that value; derate per the temperature table: 12.2 A at 40 °C, 11.7 A at 45 °C, 11.2 A at 50 °C, 10.8 A at 55 °C, and 10.3 A at 60 °C ambient. Type A residual current detection covers pulsating DC fault currents from rectified loads (SMPS, LED drivers, VFDs) in addition to sinusoidal AC — important for modern panels with electronic loads. The 4 kV rated surge voltage withstand confirms coordination with standard SPDs at the service entrance.

Supply can enter from either top or bottom, and mounting position is unrestricted — install it in any orientation within the distribution board. The IP20 protection rating applies when the board is installed with conductors connected; the enclosure itself provides the additional ingress protection for the panel environment. Depth is 72 mm, installation depth 70 mm, height 85 mm — fits standard 4-module cutouts in consumer units and panelboards.

MPN
5SU1346-7FP13