Skip to main content
Siemens 5SU1654-1RC32 — Residual Current Breakers (RCCB/RCBO)

Siemens 5SU1654-1RC32 SENTRON RCBO 32 A 2-pole C-curve 300 m

MPN5SU1654-1RC32

Siemens SENTRON 5SU1654-1RC32 RCBO, 32 A, 2-pole, 2-module, C characteristic, Type AC residual 300 mA, 10 kA (EN 60898) / 15 kA (IEC 60947-2) breaking capacity.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

5SU1654-1RC32 — Electrical Ratings
ParameterValue
Number of poles2
Overvoltage categoryIII
5SU1654-1RC32 — Identification
ParameterValue
Product designationRCBO
5SU1654-1RC32 — Mechanical
ParameterValue
Mounting positionany
Width in modular units2
Maximum75 °C
Minimum-40 °C
Width36 mm
Height90 mm
Depth70 mm
Installation depth70 mm
5SU1654-1RC32 — Environmental
ParameterValue
IP degree of protectionIP20, if the distribution board is installed, with connected conductors
5SU1654-1RC32 — Electrical
ParameterValue
Tripping Characteristic ClassC

Product details

The Siemens SENTRON 5SU1654-1RC32 is a 32 A, 2-pole RCBO in a 2-module-wide (36 mm) housing. It combines a C-curve MCB with a Type AC residual-current device rated at 300 mA. The C characteristic means the magnetic trip fires at 5 to 10 times rated current (160–320 A for this 32 A unit), which handles motor inrush and transformer charging currents without nuisance tripping. The 300 mA Type AC residual detects sinusoidal AC earth faults — standard for general-purpose circuits where DC or pulsed fault currents aren't expected. Neutral conductor switching is built in, so it disconnects both poles when the breaker trips.

The 70 mm installation depth matches the typical enclosure depth for residential and light-commercial boards; no extra clearance needed behind the rail. The -40 °C to +75 °C operating range covers unheated utility rooms.

Frequently asked questions

What is the residual current rating and type?

300 mA, Type AC — designed for sinusoidal AC earth faults only. Not suitable for circuits with DC components or pulsed fault currents (e.g., from variable-speed drives or LED drivers); those would need a Type A or Type B RCD.

MPN
5SU1654-1RC32