Skip to main content
Siemens 5SU9326-1CR10 — Residual Current Breakers (RCCB/RCBO)

Siemens 5SU9326-1CR10 SENTRON RCBO, 2P 10A C-curve 30mA 6kA

MPN5SU9326-1CR10

Siemens SENTRON RCBO, 5SU9326-1CR10, 2-pole 10A C-curve 30mA residual current, 6kA breaking capacity, 4 MW width, IP20.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

5SU9326-1CR10 — Electrical Ratings
ParameterValue
Number of poles2
Overvoltage categoryIII
5SU9326-1CR10 — Identification
ParameterValue
Product designationRCD-operated circuit breaker
Product design / constructionInstantaneous
5SU9326-1CR10 — Mechanical
ParameterValue
Mounting positionany
Width in modular units4
Maximum75 °C
Minimum-40 °C
Width72 mm
Height90 mm
Depth77 mm
Installation depth70 mm
5SU9326-1CR10 — Environmental
ParameterValue
IP degree of protectionIP20, if the distribution board is installed, with connected conductors
5SU9326-1CR10 — Electrical
ParameterValue
Tripping Characteristic ClassC
Operational current / at AC / rated value10 A

Product details

The Siemens 5SU9326-1CR10 is a SENTRON RCBO — a residual-current-operated circuit breaker that combines overcurrent protection (C-curve) and 30 mA earth-leakage protection in a single 2-pole unit, rated 10 A at 230/240 V AC, 50/60 Hz.

Occupies 4 modular width units (72 mm wide) on a DIN rail, with a depth of 77 mm and an installation depth of 70 mm — check your enclosure depth before committing; some shallow 4-module enclosures may need the 70 mm clearance. Supply can enter from either top or bottom, and the neutral conductor is switched internally (2-pole protection).

MPN
5SU9326-1CR10