Skip to main content
Siemens 5SU9354-7KK06 — Residual Current Breakers (RCCB/RCBO)

Siemens 5SU9354-7KK06 SENTRON RCBO, 6A, 30mA, Type A, C-curv

MPN5SU9354-7KK06
Active

Siemens SENTRON 5SU9354-7KK06, RCBO, 2-pole (1P+N), 6 A, C-curve, 30 mA Type A, 10 kA, 2 MW units.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

5SU9354-7KK06 — Electrical Ratings
ParameterValue
Number of poles2
Overvoltage categoryIII
5SU9354-7KK06 — Identification
ParameterValue
Product designationRCD-operated circuit breaker
Product design / constructionInstantaneous
5SU9354-7KK06 — Mechanical
ParameterValue
Mounting positionany
Width in modular units2
Maximum75 °C
Minimum-40 °C
Width36 mm
Height90 mm
Depth77 mm
Installation depth70 mm
5SU9354-7KK06 — Environmental
ParameterValue
IP degree of protectionIP20, if the distribution board is installed, with connected conductors
5SU9354-7KK06 — Electrical
ParameterValue
Tripping Characteristic ClassC

Product details

What this RCBO is and where it goes

The Siemens 5SU9354-7KK06 is a SENTRON RCBO — a residual-current-operated circuit breaker that combines overcurrent protection with ground-fault detection in a single 2-module-wide (36 mm) package.

At 36 mm wide (2 modular width units), it fits standard distribution boards. Supply can enter from top or bottom. IP20 rated once wired and installed in an enclosure.

Thermal derating and selectivity

At 40 °C it derates to 5.64 A; at 45 °C to 5.46 A; at 50 °C to 5.22 A; at 55 °C to 4.86 A. If the panel runs hot, size the circuit accordingly — the C-curve magnetic trip threshold (5–10× In) shifts with the thermal element. Pollution degree 2, overvoltage category III.

Current production lifecycle — no end-of-life notification. This is an active Siemens SENTRON catalog line.

Frequently asked questions

What does Type A residual current mean?

It detects sinusoidal AC fault currents and pulsating DC fault currents — the standard requirement for circuits with single-phase rectifiers, switching power supplies, or electronic loads.

MPN
5SU9354-7KK06