Skip to main content
Log in
Siemens 5SV1316-0KK10 — Residual Current Breakers (RCCB/RCBO)

Siemens SENTRON 5SV1316-0KK10 RCBO, 10 A, B-curve, 1P+N, 6 k

MPN5SV1316-0KK10
Active

Siemens SENTRON RCBO, 5SV1316-0KK10, 1P+N, 10 A rated at 30 °C, B-curve, 6 kA (EN 60898) / 25 kA (IEC 60947-2), 50 Hz, 18 mm wide, IP20.

Siemens 5SV1316-0KK10 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SV1316-0KK10 — Electrical Ratings
ParameterValue
Number of poles2
Overvoltage categoryIII
5SV1316-0KK10 — Identification
ParameterValue
Product designationRCBO
Product design / constructionInstantaneous
5SV1316-0KK10 — Mechanical
ParameterValue
Mounting positionany
Width in modular units1
Maximum75 °C
Minimum-40 °C
Width18 mm
Height90 mm
Depth77 mm
Installation depth70 mm
5SV1316-0KK10 — Environmental
ParameterValue
IP degree of protectionIP20, if the distribution board is installed, with connected conductors
5SV1316-0KK10 — Electrical
ParameterValue
Tripping Characteristic ClassB

Product details

The Siemens SENTRON 5SV1316-0KK10 is a 1P+N RCBO (residual current operated circuit breaker with integral overcurrent protection) rated 10 A at 30 °C with a B tripping characteristic, designed for 50 Hz systems. The part is instantaneous-trip design (no intentional delay), so it clears fast on hard faults.

Derating and ambient limits

Above that, derate linearly: 9.4 A at 40 °C, 9.1 A at 45 °C, 8.8 A at 50 °C, 8.4 A at 55 °C, 8.1 A at 60 °C, 7.7 A at 65 °C, and 7.4 A at 70 °C. IP20 rating applies only when the distribution board is installed with conductors connected — it's not a standalone IP20 device for open-panel use.

Frequently asked questions

What is the breaking capacity of 5SV1316-0KK10?

Rated 6 kA according to EN 60898 for standard domestic/commercial circuits, and 25 kA according to IEC 60947-2 for industrial panel duty — the 25 kA figure is the one to use when coordinating with upstream protective devices in a high-fault installation.

What is the width of 5SV1316-0KK10?

18 mm, which is one modular unit (1 MW). It fits a standard DIN-rail slot without crowding adjacent breakers.

Where can I buy 5SV1316-0KK10?

Sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at the time of quotation.

What compliance documentation does Siemens provide for 5SV1316-0KK10?

The part carries a halogen-free and silicon-free designation, and is designed to EN 60898 and IEC 60947-2. Specific RoHS/REACH declarations and the CE/UKCA marking are available from the manufacturer's documentation portal for this SENTRON order code.

MPN
5SV1316-0KK10