Skip to main content
Log in
Siemens 5SV1316-3KK10 — Residual Current Breakers (RCCB/RCBO)

Siemens 5SV1316-3KK10 SENTRON RCBO, Type F, 10 A, B Curve, 1

MPN5SV1316-3KK10
Active

Siemens SENTRON RCBO, 5SV1316-3KK10, Type F residual current, 10 A, B characteristic, 1 MW, 6/25 kA breaking capacity.

Siemens 5SV1316-3KK10 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SV1316-3KK10 — Electrical Ratings
ParameterValue
Number of poles2
Overvoltage categoryIII
5SV1316-3KK10 — Identification
ParameterValue
Product designationRCBO
Product design / constructionSuper resistant K
5SV1316-3KK10 — Mechanical
ParameterValue
Mounting positionany
Width in modular units1
Maximum75 °C
Minimum-40 °C
Width18 mm
Height90 mm
Depth77 mm
Installation depth70 mm
5SV1316-3KK10 — Environmental
ParameterValue
IP degree of protectionIP20, if the distribution board is installed, with connected conductors
5SV1316-3KK10 — Electrical
ParameterValue
Tripping Characteristic ClassB

Product details

What this RCBO brings to the panel

The Siemens 5SV1316-3KK10 is a 2-pole (1P+N) RCBO from the SENTRON Super resistant K design family, combining overcurrent protection and residual current detection in a single 18 mm-wide module.

Temperature derating — the real current rating at panel ambient

The 10 A nominal rating holds at 30 °C ambient. At 40 °C it derates to 9.4 A, at 50 °C to 8.8 A, and at 70 °C to 7.4 A.

The module is 18 mm wide (1 MW), 77 mm deep, 90 mm tall, with a 70 mm installation depth. The supply cord can enter from either top or bottom, and the design accepts any mounting orientation.

Frequently asked questions

Where can I buy 5SV1316-3KK10 and how do I get a price?

This part is sourced to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm price and lead-time estimate.

When sourcing 5SV1316-3KK10, what's the closest functional second-source?

The closest functional peer in the SENTRON family is the 5SL6016-7KL, which shares the same 1 MW footprint, B curve, and 10 A rating but uses a standard Type A residual current instead of the Type F. For applications with VFD or EVSE leakage, the Type F on the 5SV1316-3KK10 is the correct choice.

What is 5SV1316-3KK10's listed depth?

The listed depth is 77 mm, with an installation depth of 70 mm. Width is 18 mm (1 MW), height is 90 mm.

Will 5SV1316-3KK10 drop into a panel specified around 5SL6016-7KL without rewiring?

Yes, the 18 mm width and 1 MW footprint are identical, so it fits the same DIN-rail slot and busbar arrangement. The supply can enter from top or bottom, matching the 5SL6016-7KL wiring convention. The only difference is the residual current type — verify that the Type F characteristic is compatible with the downstream loads.

What compliance documentation does Siemens provide for 5SV1316-3KK10?

The part carries approvals per EN 60898 (6 kA) and IEC 60947-2 (25 kA), overvoltage category III, pollution degree 2, and is halogen-free and silicon-free. Standard Siemens declarations of conformity for CE marking are available; check the specific order code for UL/CSA listing status at time of order.

MPN
5SV1316-3KK10