BOM / RFQ

Siemens 5SV4312-0GV01 — Residual Current Breakers (RCCB/RCBO)

Siemens SENTRON 5SV4312-0GV01 RCCB, 2P, 25A, 30mA, AC Type

MPN5SV4312-0GV01

Active

Siemens SENTRON series, RCCB (residual current circuit breaker), 2-pole, 25 A rated, 30 mA trip sensitivity, AC type, 10 kA SCCR, DIN-rail mount, 36 mm wide.

Add to RFQ

Siemens 5SV4312-0GV01 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SV4312-0GV01 — Electrical Ratings
Parameter	Value
Number of poles	2
Overvoltage category	III

5SV4312-0GV01 — Identification
Parameter	Value
Product designation	RCCB
Product design / construction	Instantaneous

5SV4312-0GV01 — Mechanical
Parameter	Value
Mounting position	any
Width in modular units	2
Maximum	45 °C
Minimum	-25 °C
Width	36 mm
Height	90 mm
Depth	70 mm
Installation depth	70 mm

5SV4312-0GV01 — Environmental
Parameter	Value
IP degree of protection	IP20, if the distribution board is installed, with connected conductors

Product details

The Siemens SENTRON 5SV4312-0GV01 is a 2-pole residual current circuit breaker (RCCB) rated for 25 A continuous and 30 mA trip sensitivity, AC residual current type. It's built for 230 V AC, 50 Hz systems and carries a 10 kA short-circuit current rating per IEC 61008-1, so it can handle fault currents up to that level without welding contacts or cascading upstream.

Mounting & Panel Fit

Snaps onto DIN rail (REG profile), 36 mm wide — that's 2 modular width units. The IP20 rating applies once the distribution board is closed and conductors are connected.