Skip to main content
Siemens 5SV5312-0 — Residual Current Breakers (RCCB/RCBO)

Siemens 5SV5312-0 SENTRON RCCB, 2-pole, 25 A, 30 mA, 230 V A

MPN5SV5312-0
Active

Siemens SENTRON 5SV5312-0 RCCB, 2-pole, Type AC, 25 A rated current, 30 mA residual sensitivity, 230 V AC, 6 kA short-circuit current rating, DIN rail mount, IP20.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SV5312-0 — Electrical Ratings
ParameterValue
Number of poles2
Overvoltage categoryIII
5SV5312-0 — Identification
ParameterValue
Product designationRCCB
Product design / constructionInstantaneous
5SV5312-0 — Mechanical
ParameterValue
Mounting positionany
Width in modular units2
Maximum45 °C
Minimum-25 °C
Width36 mm
Height90 mm
Depth70 mm
Installation depth70 mm
5SV5312-0 — Environmental
ParameterValue
IP degree of protectionIP20, if the distribution board is installed, with connected conductors

Product details

The Siemens 5SV5312-0 is a 2-pole residual current circuit breaker (RCCB) from the SENTRON family, rated at 25 A with a 30 mA residual sensitivity, Type AC, for 230 V AC 50 Hz systems. It is an instantaneous (non-time-delayed) device, meaning it trips without intentional delay on a residual fault — suited for general-purpose shock protection in residential and commercial distribution boards.

Width of 36 mm (2 modular units at 18 mm per unit) and a depth of 70 mm — standard footprint that clips onto 35 mm DIN rail (REG) and occupies two positions in a 60 mm grid distribution board.

Short-circuit and fault coordination

Rated short-circuit current (Icn) of 6 kA per IEC 61008-1. In a typical domestic or light commercial board with a 63 A upstream fuse or MCB, this RCCB will withstand the let-through energy of a downstream fault without rupturing. The 0.5 kA rated conditional short-circuit current (IΔm) per IEC 61008-1 covers the residual-circuit's own withstand under fault conditions — a coordination figure, not a service rating. Overvoltage category III suits fixed-installation mains connection.

Frequently asked questions

Where can I buy 5SV5312-0 and how is it quoted?

The 5SV5312-0 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the depth of 5SV5312-0?

The depth is 70 mm, which matches the standard 70 mm installation depth for SENTRON modular devices on DIN rail.

What is the width of 5SV5312-0?

Width is 36 mm, occupying 2 modular units (2 x 18 mm) on a 60 mm grid.

What compliance documentation does Siemens provide for 5SV5312-0?

The device is designed and tested per IEC 61008-1, carries a 6 kA short-circuit rating, and is rated for overvoltage category III. Silicon-free construction is confirmed. Specific RoHS/REACH/UL declarations are available from the manufacturer on request.

MPN
5SV5312-0