Siemens SENTRON 5SV5646-6KL, RCCB, 4-pole, type A, In: 63 A, 300 mA, Un AC: 400 V, N left, DIN rail mount.
| Parameter | Value |
|---|---|
| Number of poles | 4 |
| Overvoltage category | III |
| Parameter | Value |
|---|---|
| Product designation | RCCB |
| Product design / construction | Instantaneous |
| Parameter | Value |
|---|---|
| Mounting position | any |
| Width in modular units | 4 |
| Maximum | 45 °C |
| Minimum | -25 °C |
| Width | 72 mm |
| Height | 90 mm |
| Depth | 70 mm |
| Installation depth | 70 mm |
| Parameter | Value |
|---|---|
| IP degree of protection | IP20, if the distribution board is installed, with connected conductors |
The 5SV5646-6KL: Type A detection covers sinusoidal AC residual currents plus pulsating DC. The 300 mA trip threshold is typical for fire protection or general shock prevention in industrial sub-distribution.
Depth is 70 mm, width 72 mm, height 90 mm — the 4-module footprint matches the SENTRON family. Supply can enter from top or bottom. IP20 rating applies once the distribution board is installed with conductors connected; the device itself is not sealed for wet environments.
It is a 4-pole residual current circuit breaker (RCCB) for 400 V AC systems, rated 63 A with a 300 mA type A trip. It protects against ground faults in industrial sub-distribution panels, typically on DIN-rail mounted boards.
Depth is 70 mm, width is 72 mm, height is 90 mm. It occupies 4 modular width units on a DIN rail.