It protects a single-phase 230 V AC final circuit at 10 A with a C-curve tripping characteristic, and it interrupts fault currents up to 6 kA per both EN 60898-1 and IEC 60947-2.
Snaps onto DIN rail (REG) and occupies a single modular width unit (18 mm). Mounting position is unrestricted — install it any orientation in the enclosure. Installation depth is 70 mm; the overall body depth is 68.5 mm, so it sits flush with the front of a standard 70 mm deep distribution board.
Rated for 10 000 mechanical switching cycles typical. Halogen-free and silicon-free construction. Degree of pollution 2, overvoltage category III. Supply frequency 50 Hz only. Minimum testing voltage 195 V. No short-time delayed switching function.