Skip to main content
Log in
Siemens 5SY3002-7KL — 1-Pole MCB (DIN Rail)

Siemens 5SY3002-7KL SENTRON MCB, 2A C-Curve 1P+N 4.5kA

MPN5SY3002-7KL

Siemens SENTRON 5SY3002-7KL, miniature circuit breaker, 1P+N, C characteristic, 2 A rated current, 4.5 kA breaking capacity at 230 V AC, 18 mm width, standard rail mount.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

5SY3002-7KL — Identification
ParameterValue
Product designationMiniature circuit breaker
Brand nameSENTRON
5SY3002-7KL — Electrical & Protection
ParameterValue
Tripping characteristic classC
Rated value (EN 60898)4.5 kA
Overvoltage categoryIII
5SY3002-7KL — Mounting & Connection
ParameterValue
Mounting positionany
Combined terminal, topNo
Combined terminal, bottomNo
Width18 mm
Height90 mm
Depth76 mm
Installation depth70 mm
Torque, min.-40 °C
Torque, max.75 °C
SealableYes
5SY3002-7KL — Environmental
ParameterValue
IP protection classIP20, with connected conductors
Pollution degree2
Halogen-freeYes
Silicone-freeYes

Product details

The Siemens 5SY3002-7KL is a SENTRON miniature circuit breaker (MCB) rated 2 A with a C tripping characteristic, 1P+N poles, and a 4.5 kA breaking capacity at 230 V AC per EN 60898. The 18 mm width (one modular unit) and standard rail mounting mean it clips into any DIN-rail enclosure alongside other SENTRON or third-party devices.

Sourcing and lifecycle — current production, quoted to order

The mechanical service life is 4 000 switching cycles typical — adequate for a distribution circuit that operates infrequently, but not rated for frequent motor starting where a contactor would handle the switching.

Integration and compliance notes

Mounts in any position on standard rail. The neutral conductor is switched (product function neutral conductor switching = yes), so verify the neutral bus bar arrangement in your panel — this MCB does not leave the neutral continuously connected. The top and bottom terminals are not combined, meaning line and load each terminate separately. Touch protection is built in, which satisfies the finger-probe requirements for IPXXB panels.

Frequently asked questions

What is the breaking capacity of 5SY3002-7KL?

4.5 kA at 230 V AC per EN 60898. This is the rated short-circuit capacity for the 1P+N configuration.

Will 5SY3002-7KL drop into a panel specified for 5SY6020-7KL?

Yes, the dimensions are identical — 18 mm width, 76 mm depth, 90 mm height, standard rail mount. The 5SY6020-7KL is a 20 A version with a 6 kA breaking capacity; the 5SY3002-7KL is 2 A at 4.5 kA. Same footprint, same terminal layout, same 1P+N switching. No rewiring needed if the ampacity and fault rating match your circuit.

What compliance documentation does Siemens provide for 5SY3002-7KL?

The part is halogen-free and silicon-free, which supports RoHS and REACH declarations. The product designation follows DIN EN 81346-2 (letter F for protective device). The breaking capacity is certified per EN 60898. For specific UL/CSA documentation, check the manufacturer's declaration package — the IP20 rating and overvoltage category III are standard for IEC-based distribution.

Where can I buy 5SY3002-7KL and what is the lead time?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock count or lead-time number published here, but a quote request gets you a firm position within one business day.

MPN
5SY3002-7KL