Skip to main content
Siemens 5SY4106-7XX02

Siemens 5SY4106-7XX02 SENTRON MCB, C-Curve 1P, 10kA IEC

MPN 5SY4106-7XX02

Siemens SENTRON 5SY4106-7XX02 miniature circuit breaker, 1-pole, C characteristic, 10 kA (IEC 60898-1) / 35 kA (IEC 60947-2), 1 MW unit, with integrated auxiliary switch 1NO+1NC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SY4106-7XX02 specifications
ParameterValue
Poles1
IP ratingIP20
MountingQuick assembly system
Temp operating max75 °C
Temp operating min55 °C
Depth76 mm
Width27 mm
Height90 mm
Energy limitation class3

Product details

On a DIN-rail panel it occupies one modular width (27 mm,), 76 mm deep, and mounts in any position. The integrated auxiliary switch 1NO+1NC gives a remote status contact without eating an extra slot — useful for PLC feedback or alarm annunciation on a tight rail.

Breaking capacity — two numbers, one decision

This breaker carries dual breaking-capacity ratings: 10 kA per IEC/EN 60898-1 and 35 kA per IEC 60947-2. The 10 kA figure governs residential and light-commercial distribution boards tested to the MCB standard. The 35 kA figure applies when the breaker is installed under the industrial standard — typical in a factory sub-distribution board with a higher fault-current capability upstream. For a panel builder, the 35 kA IEC 60947-2 rating is the one that clears the SCCR requirement on most machine-tool and process-line specs. The UL/CSA rating sits at 5 kA for North American installations under UL 1077.

Panel integration — what fits where

The 1 MW width (27 mm) leaves room for a full 24-way distribution board in a standard 600 mm enclosure.

The 5SY4106-7XX02 is halogen-free and silicon-free. It carries IEC/EN 60898-1 and IEC 60947-2 certification. For RoHS, REACH, and UL documentation, the standard SENTRON declaration pack applies — available on request with the RFQ.

MPN
5SY4106-7XX02