Skip to main content
Siemens 5SY4113-7CC — 1-Pole MCB (DIN Rail)

Siemens 5SY4113-7CC SENTRON MCB, 1P C-Curve 13A 10kA

MPN5SY4113-7CC

Siemens SENTRON 5SY4113-7CC, 1-pole miniature circuit breaker, C-curve, 13 A rated current, 10 kA breaking capacity per EN 60898, 1 MW width.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5SY4113-7CC — Identification
ParameterValue
Product designationMiniature circuit breaker
Brand nameSENTRON
Number of poles1
Pole design1P
Application suitabilityMechanical engineering / industry
5SY4113-7CC — Electrical & Protection
ParameterValue
Tripping characteristic classC
Energy limitation class3
Overvoltage categoryIII
5SY4113-7CC — Mounting & Connection
ParameterValue
Mounting positionany
Fastening methodQuick assembly system
Combined terminal, topYes
Combined terminal, bottomYes
Width18 mm
Height90 mm
Depth76 mm
Installation depth70 mm
Modular width units1
Torque, min.-40 °C
Torque, max.75 °C
SealableYes
5SY4113-7CC — Environmental
ParameterValue
IP protection classIP20, with connected conductors
Pollution degree3
Halogen-freeYes
Silicone-freeYes

Product details

Rated current and thermal derating

The Siemens 5SY4113-7CC is a 1-pole SENTRON miniature circuit breaker with a C-curve trip characteristic. At 35 °C ambient it carries a full 13 A; per the datasheet derating curve, that drops to 11.95 A at 40 °C, 11.38 A at 45 °C, 10.78 A at 50 °C, and 10.15 A at 55 °C. If your panel ambient runs above 35 °C, size the load against the derated figure, not the 13 A label rating.

Breaking capacity and standards

Rated breaking capacity is 10 kA per EN 60898, the standard for household and similar installations. Overvoltage category III and pollution degree 3 mean it's rated for fixed-installation downstream of the service entrance, not just final circuits. The 50/60 Hz supply frequency covers both 50 Hz and 60 Hz grids without derating.

Physical fit and mounting

Occupies 1 modular width (18 mm) on DIN rail. Depth is 76 mm, height 90 mm, installation depth 70 mm. Snap-on fastening to the rail; mounting position any. The combined terminal top and bottom accept wiring without re-termination when ganging. IP20 with connected conductors — suitable for enclosed panel use, not for wet or outdoor locations without a higher-rated enclosure.

Frequently asked questions

What is the depth of 5SY4113-7CC?

The depth is 76 mm, with an installation depth of 70 mm.

What is the width of 5SY4113-7CC?

Width is 18 mm, which is 1 modular unit on DIN rail.

Will 5SY4113-7CC drop into a panel specified for 5SY4113-7CV?

Both are 1-pole SENTRON MCBs with the same 18 mm width and DIN-rail mounting, so the physical fit is identical. The 5SY4113-7CC is a C-curve 13 A unit; verify that the trip characteristic and rating match the original specification before substituting.

MPN
5SY4113-7CC