Siemens SENTRON 5SY4315-5, 3-pole miniature circuit breaker, tripping characteristic A, 10 kA breaking capacity at 400 V AC per EN 60898, 35 kA per IEC 60947-2, 54 mm wide (3 MW).
| Parameter | Value |
|---|---|
| Brand name | SENTRON |
| Number of poles | 3 |
| Pole configuration | 3P |
| Suitability for operation | Mechanical engineering / industry |
| Parameter | Value |
|---|---|
| Tripping characteristic (curve) | A |
| Breaking capacity per EN 60898 | 10 kA |
| Breaking capacity per IEC 60947-2 | 35 kA |
| Overvoltage category | III |
| IP protection class | IP20, with connected conductors |
| Pollution degree | 3 |
| Parameter | Value |
|---|---|
| Rated voltage (AC, multi-phase) | 440 V |
| Voltage type (AC/DC) | AC |
| Supply frequency range | 50/60 Hz |
| Power loss per pole at rated current (AC, hot) | 2.1 W |
| Mechanical service life (operating cycles, typ.) | 10 000 |
| Neutral conductor switching | No |
| Rated voltage (AC, single-phase) | 440 V |
| Parameter | Value |
|---|---|
| Modular width units | 3 |
| Mounting position | any |
| Width | 54 mm |
| Height | 90 mm |
| Depth | 76 mm |
| Installation depth | 70 mm |
| Terminal tightening torque, max. | 75 °C |
| Terminal tightening torque, min. | -40 °C |
| Combined terminal, top | Yes |
| Combined terminal, bottom | Yes |
| Fastening method | Quick assembly system |
| Sealable | Yes |
| Accepts supplementary devices | Yes |
| Parameter | Value |
|---|---|
| Halogen-free | Yes |
| Silicone-free | Yes |
| Influence of surrounding temperature | max. 95% to 55°C, max. 55% to 70°C, max. 35% to 75°C |
| Vibration resistance (IEC 60068-2-6) | ±1mm at 5 to 25Hz; 50m/s² at 25 to 150Hz |
Dual-rated to IEC/EN 60898-1 and IEC/EN 60947-2 / UL1077, the 5SY4315-5 carries approvals for both residential-style and industrial applications. The UL1077 listing (5 kA at AC) covers North American supplementary protection use. Rated insulation voltage is 440 V AC for both single-phase and multi-phase operation, with a DC rating of 60 V (72 V max).
10 kA per EN 60898-1 and 35 kA per IEC 60947-2 at 400 V AC. At DC (60 V) it is rated 15 kA per IEC 60947-2.
Characteristic A trips magnetically at 2 to 3 times rated current. It is faster than B-curve (3-5×) and C-curve (5-10×), making it suitable for protecting sensitive loads like semiconductor circuits or long cable runs where fast fault clearing is needed.
No related articles