It breaks fault currents up to 6 kA per IEC/EN60898-1 at 230 V AC, 50/60 Hz — standard for protecting branch circuits in residential and light commercial panels. The 76 mm depth plus 70 mm installation depth means it clears most standard enclosures without a deep can.
If your panel feeds from a transformer with higher available fault current, you'll need to coordinate upstream. Rated insulation voltage is 250 V AC, overvoltage category III, pollution degree 2 — standard for fixed-installation distribution boards. The neutral pole switches with the phase, so it disconnects both conductors on a fault. Power loss runs 1.4 W per pole in hot operation, which matters for thermal derating when you pack multiple units side by side in a small enclosure.
Integration details
Accepts supplementary devices like shunt trips or auxiliary contacts — check the SENTRON accessory catalog for compatibility. Sealable for tamper-proofing in metered or secured installations.