The 2-pole 1P+N design switches the neutral conductor, which matters for single-phase subcircuits where isolating both line and neutral is required by local code or the equipment specification. Breaking capacity is dual-rated: 15 kA per EN 60898 and 25 kA per IEC 60947-2. For UL 1077-listed supplementary protection, the interrupting rating is 5 kA. Rated operational voltage is 230 VAC single-phase, with a DC rating of 60 V and a maximum DC voltage of 72 V. Frequency is 50/60 Hz.
This breaker is rated for mechanical engineering and industry — think control cabinets for conveyors, pumps, packaging lines, or machine tools where the C-curve matches the load profile. The sealable design lets a panel builder lock the toggle position after commissioning, preventing unauthorized reset on a locked-out circuit.