The coil pulls in on 230 V AC, and the contactor is also rated for 220 V DC coil operation — useful if you're mixing AC and DC control voltages in the same panel. The IP20 rating means it's intended for enclosure mounting — no washdown exposure. Maximum switching voltage is 440 V AC, and it can handle a filament lamp load up to 1 500 W, which makes it a candidate for lighting contactor duty in commercial or residential panels.
Dimensions are 36 mm wide, 90 mm tall, and 71 mm deep with an installation depth of 64 mm — the extra 7 mm accounts for the coil terminals protruding past the mounting base. That depth is shallow enough to fit most shallow backboxes or DIN-rail enclosures without crowding the wiring channel. Two NO and two NC contacts give you flexibility for both normally-open load switching and normally-closed auxiliary functions (like status feedback or interlocking) without adding a side-mount block.