Skip to main content
Siemens 6AG1055-4MH08-2BA1 — PLCs (Programmable Logic Controllers)

Siemens 6AG1055-4MH08-2BA1 SIPLUS LOGO! TDE, -40…+70 °C

MPN6AG1055-4MH08-2BA1
Active

Siemens SIPLUS LOGO! TDE, 6-line FSTN display, conformal coating, -40…+70 °C, 24 V DC, IP65 front, for LOGO! 8.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1055-4MH08-2BA1 — Electrical
ParameterValue
Rated value (DC)12 V; 12/24 V DC, 24 V AC
Power loss (typ.)1.8 W; Power supply: 24 V DC
6AG1055-4MH08-2BA1 — Environmental
ParameterValue
Installation altitude, max.5 000 m
Temperature, min.-40 °C
Temperature, max.70 °C
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
6AG1055-4MH08-2BA1 — Mechanical
ParameterValue
Width128.2 mm
Height86 mm
Depth38.7 mm
Weight (approx.)220 g

Product details

SIPLUS LOGO! TDE — extended-temperature operator panel

The 6AG1055-4MH08-2BA1 is a SIPLUS variant of the LOGO! TDE, built on the standard 6ED1055-4MH08-0BA1 but with conformal coating and a widened temperature range of -40 to +70 °C (start-up from -20 °C). That means it handles cold storage, unheated enclosures, or hot cabinet summers without derating — the coating also shrugs off condensation, diesel mist, and oil droplets in the air.

Power draw is 1.8 W typical from a 24 V DC supply, so it won't strain a shared power budget in a small cabinet. The two Ethernet ports connect directly to LOGO! 8 and higher for programming via LOGO! Soft Comfort V8 — no extra gateway needed.

Frequently asked questions

Is 6AG1055-4MH08-2BA1 compatible with LOGO! 8?

Yes, it is designed for use with LOGO! 8 and higher, programmed via LOGO! Soft Comfort V8. The two Ethernet ports connect directly to the LOGO! base module.

MPN
6AG1055-4MH08-2BA1